3
Select “K575” (this System) on the target
device.
.
K575
Bluetooth
0
When the connection is established,
“CONNECTED” appears on the display of the
System.
Then the “
n
” icon lights up.
0
When the target device requests for password
during pairing, enter “0000”.
NOTE
0
If pairing is unsuccessful, delete the pairing
information of the System on the target device and
perform pairing again.
Playback
Play back the music files after the connection with the
target device is complete. (p. 9)
Canceling the connection
To cancel using NFC
Touch the N mark on the System with the NFC antenna
area of the target device that is currently connected.
“DISCONNECT” appears on the display of the System.
The “
n
” icon lights up and then blinks (pairing standby state).
NOTE
0
If you touch the N mark of the System using another
target device, the device currently connected will be
disconnected and the newly-touched device is
connected.
To cancel manually
Press and hold the [
o
] button of the System until
“DISCONNECT” appears on the display.
After “DISCONNECT” is displayed, the “
n
” icon
changes from solid light to blinking light (pairing
standby state).
Remote control
Main unit
.
.
(Press and hold down)
(Press and hold down)
NOTE
The connection is canceled automatically in the
following cases.
0
When the connection is canceled on the target
device, or the Bluetooth function on the target
device is turned off.
0
When the System or the target device is turned off.
0
When the source is changed to another audio
sources.
Playable BLUETOOTH devices
0
To connect the device to this System via
BLUETOOTH, the device must be compatible with
the A2DP and the AVRCP profiles.
14
