English
17
Loading the remote control batteries
1
Remove the
battery cover.
2
Load the AAA-size batteries
supplied with the system.
3
Close the bat-
tery cover.
z
Check the polarity of the
batteries (
UV
) when
loading them.
z
The batteries supplied with the system are for operational testing and may
last only for a short time.
z
When replacing the batteries, always load 2 new batteries.
Component Names and Functions
Using the remote control
After plugging the main unit into an AC
wall outlet, press the power
[
K
]
key on
the remote control to turn the system on.
After the system powers up, press the key
for the function you want to use.
Point the remote control at the remote
sensor when using it.
z
The remote control may not operate
correctly if direct sunlight or light from
a high-frequency fluorescent lamp
(such as an inverter type) is shining
on the remote sensor. If this happens,
move the system to a diff erent location
to avoid this type of malfunction.
CAUTION
Do not leave the battery near fi re or under direct sunlight. A fi re, explosion or excessive heat
generation may result.
Approx.
6 m
Approx.
30
q
Approx.
30
q
R-K731̲E.indb 17
R-K731̲E.indb 17
2011/10/07 14:08:38
2011/10/07 14:08:38
