11
installation
Temp.
Spin
Delay
Start /Pause
Selections
60°C
40°C
Off
Cotton 90°C
Eco 20°C
Cotton
Cotton
Easy Care
Wool
Rinse
Allergy Safe
e
Spin
Daily 60°/60'
Sport
Rapid 15'
Mix
Hand Wash
Delicate
Shirts
K814WM18
Pre Wash
levelling the washing machine
There are 4 levelling feet on the underside. They MUST be adjusted to make sure the washing
machine is level.
Ensure all four lock rings are tightened securely. Check the feet are still bolted to the washing
machine - if they’re unbolted, the washing machine will move around.
hose and cable lengths
How to connect from the left side
~95cm
~145cm
~95cm
~150cm
min. 60cm
max. 100cm
~95cm
~140cm
How to connect from the right side
* All images are for indication only; please refer to your individual unit for actual item.
water supply hose
Points to remember
• Follow the instructions in this section to avoid water leaks.
• Don’t connect the hose to a combination tap.
• Don’t twist, squash, modify or cut the hose.
• This machine is designed to connect to the cold water supply. Do not connect to the hot
water supply.
• Use only the new water supply hose supplied. Old hose sets should not be reused.
• The mains water pressure must be 0.1MPa - 1MPa.
• If your washing machine is delivered in freezing weather conditions, leave it at room
temperature for 24 hours after you’ve set it up before using it. This ensures there’s no ice
blocking the water supply hose. If your water supply hose freezes, add 2 or 3 litres of warm
water to the drum. Then run a “Spin” only programme.
Adjust all four
feet by rotating
each upwards or
downwards.
On each foot,
loosen the lock
ring by turning
clockwise.
Use a spirit level
to ensure the
washing machine
is level.
Tighten each lock ring by
turning them anti-clockwise
(towards the washing
machine body).
Temp.
Spin
Delay
Start /Pause
Selections
60°C
40°C
Off
Cotton 90°C
Eco 20°C
Cotton
Cotton
Easy Care
Wool
Rinse
Allergy Safe
e
Spin
Daily 60°/60'
Sport
Rapid 15'
Mix
Hand Wash
Delicate
Shirts
K814WM18
Pre Wash
1
2
3
4
Kenwood 10kg Washing Machine K1014WM18 Manual.indd 11
21/06/2018 08:17