18
clock setting
When the microwave is connected to the mains power, the LED display will show ”
0:00
” and the
microwave will beep once. Please ensure that you have set the clock prior to use.
Please follow the steps below to set the clock.
• This is a 24-hour clock. When the
microwave is connected to the mains
power for the first time or when the power
is resumed after a power interruption, the
LED display will show “
0:00
”. To re-set the
clock, follow the above 5 steps.
• In the process of clock setting, if the
STOP/CLEAR
(3) button is pressed or if
there is no operation within 1 minute, the
microwave will go back to the previous
status automatically.
• To find out the current time while the
microwave is operating, press the
Clock
(1) button. It will last for 2-3 seconds and
then return to its original display.
1. Press the
CLOCK
(1) button and the hour digits
will flash.
2. Press the
(2)
buttons to adjust the hour digits.
The input time has to be within 0-23 hours.
3. Press the
CLOCK
(1) button and the minute digits
will flash.
4. Press the
(2)
buttons to adjust the minute
digits. The input time has to be within 0-59
minutes.
5. Press the
CLOCK
(1) button again to complete
the clock setting. “
:
” will start flashing. The clock
setting is complete.
3
2
1
K23MFW15_IB_Final190903.indd 18
23/09/2019 17:57