3
This KAX941PL attachment features
the Twist Connection System
and is designed to fit directly on the
latest generation Kenwood Chef
models (identified as TYPE KVC,
KVL, KCC, KWL and KCL).
This attachment can also fit Kmix
Stand Mixers featuring a slow speed
attachment outlet (TYPE KMX).
To check that this attachment
is compatible with your Stand
Mixer you will need to ensure both
components feature the Twist
Connection System
.
If your Stand Mixer features the
Bar Connection System
you will also need an adaptor
before operation is possible. The
reference code for the adaptor is
KAT001ME. For more information
and how to order the adaptor visit
www.kenwoodworld.com/twist
.
Use the grainmill to mill a range
of cereals including wheat, rye,
buckwheat, husked barley, millet
and rice. Oats can also be ground
but a coarse setting should be
selected.
All the cereals must be dry
otherwise the mill will clog.
before using for the first time
l
Wash the parts see ‘care and
cleaning’
key
a
hopper
b
grainmill body
c
scroll
d
milling ring
e
milling cone
f
adjusting control
g
ring nut
to assemble
1 Insert the scroll into the grainmill
body.
2 Add the milling ring ensuring that it
locates in its recess.
3 Fix the milling cone in position.
4 Add the adjusting control, ensuring
that the slot fits into the locating peg
at the bottom of the grainmill body.
5 Place the ring nut in position and
tighten by turning clockwise.
6 Fit the hopper.
Cleaning
l
Before removing your grainmill from the
Stand Mixer, switch off and unplug.
l
Remove the grainmill from the slow speed
outlet and dismantle.
adjusting control, milling ring and cone
l
These components should be cleaned with a
dry coarse brush. Do not immerse in water.
all other parts
l
Wash in hot soapy water and dry thoroughly.
l
Do not place the parts in the dishwasher.
l
Refer to your main Stand Mixer instruction
book for additional safety warnings.
