34
7 - ELECTRICAL INSTALLATION
IMPORTANT: The double oven must be
installed in accordance with the manu-
facturer’s instructions.
Incorrect installation, for which the
manufacturer accepts no responsibili-
ty, may cause damage to persons, ani-
mals and things.
GENERAL
•
The connection to the electrical net-
work must be carried out by qualified
personnel and must be according to
existing norms.
•
The appliance must be connected to
the mains checking that the voltage
corresponds to the value given in the
rating plate and that the electrical ca-
ble sections can withstand the load
specified on the plate.
•
The appliance can be connected di-
rectly to the mains placing an omni-
polar switch with minimum opening
between the contacts of 3 mm betwe-
en the appliance and the mains.
•
The power supply cable must not
touch the hot parts and must be posi-
tioned so that it does not exceed 75°C
at any point.
•
Once the appliance has been installed,
the switch must always be accessible.
•
If the power supply cable (not supplied
with the appliance) is damaged it must
be substituted by a suitable cable.
The connection of the appliance to
earth is mandatory.
The manufacturer declines all respon-
sability for any inconvenience resul-
ting from the inobservance of this con-
dition.
Before effecting any intervention on
the electrical parts of the appliance,
the connection to the network must be
interrupted.
FEEDER CABLE SECTION
Type H05RR-F or H05VV-F
230 V~ 4080 W (17,7 A) 3 x 2,5 mm
2
(**)
(**) Connection with wall box connection.
IMPORTANT: This double oven must be
connected to a suitable double pole con-
trol unit adjacent to the oven.
NO DIVERSITY CAN BE APPLIED TO
THIS CONTROL UNIT.