English
|
9
same program in the same RDS network with
better reception.
Í
RDS Regional: “RDS REG”
➤
“ON”*,”OFF”
Sets whether to switch to the station only in the
specific region using the “AF” control.
Î
Auto TP Seek: “ATP SEEK”
➤
“ON”*,”OFF”
When traffic information station reception is poor,
automatically searches for a station that can be
received better.
Ï
Name Set: “AUX NAME”
➤
“AUX”*, “DVD”,
“PORTABLE”, “GAME”, “VIDEO”, “TV”
Sets the display when switched to AUX source.
<INITIAL SET>
Ì
Mixed Preset Memory Switching: “PRESET
TYPE”
➤
“TYPE NORM”*,“TYPE MIX”
“TYPE NORM”:
1 station can be assigned to 1 preset button in
each of 4 bands (FM1, FM2, FM3, and AM), i.e.,
a total of 24 stations (6 stations x 4 bands) can
be preset.
“TYPE MIX”:
A total of 6 stations can be assigned to a total
of 6 preset buttons regardless of band (FM1,
FM2, FM3, and AM). You can recall a preset
station without switching between bands.
Ó
Beep: “KEY BEEP”
➤
“ON”*,“OFF”
Setting the operation check sound (beep sound)
ON/OFF.
Ô
Russian language setting: “RUSSIAN SET”
➤
“ON”,“OFF”*
When this is set to ON, the following character
strings are displayed in Russian:
Folder name/ File name/ Song title/ Artist name/
Album name
Power OFF Timer: “P-OFF WAIT”
➤
“----”,“20M”*,“40M”,“60M”
Setting the timer to turn this unit’s power OFF
automatically when Standby mode continues.
Using this setting can save the vehicle’s battery
power.
– – – –: Power OFF Timer function is OFF.
20M: Turns the power OFF after 20 minutes.
40M: Turns the power OFF after 40 minutes.
60M: Turns the power OFF after 60 minutes.
Ò
Built in AUX: “BUILTIN AUX”
➤
“ON1”*,”ON2”,”OFF”
When this is set to ON, AUX source can be
selected.
ON1: Outputs the sound of external unit
connected to the AUX terminal when
switched to AUX source.
ON2: Activates the attenuator function when
turning on the power with AUX source
selected.
Turn off the attenuator function when
listening to output from external unit. This
prevents the noise when no external unit is
connected to AUX terminal.
OFF: Disables the selection of AUX source.
Set to OFF when not using the AUX terminal.
Ú
CD READ: “CD READ”
➤
“1”*,”2”
Sets the method for reading CD.
When unable to play special format CD, set this
function to “2” to force playing. Note that some
music CD may be unplayable even when set to
“2”.
In addition, audio files cannot be played when set
to “2”. Normally, keep this set to “1”.
1 : Automatically distinguishes between audio file
disc and music CD when playing disc.
2 : Forces playing as music CD.
"
Switching Preout
*1
: “SWITCH PRE”
➤
“REAR”*,”SUB-W”
Switches the preout between rear output (“REAR”)
and subwoofer output (“SUB-W”).
Æ
Speaker Select: “SP SELECT”
➤
“OFF”*,”5/4”,”6*9/6”,”OEM”
Fine-tuning so that the System Q value is optimal
when setting the speaker type as follows;
Speaker type
Display
OFF
“SP OFF”
For 5 & 4 in. speaker
“SP 5/4”
For 6 & 6x9 in. speaker
“SP 6*9/6”
For the OEM speaker
“SP OEM”
å
Firmware Upgrade: “F/W UP xx.xx”
➤
Upgrades the firmware.
Selecting “YES” and then pressing [VOL] knob
starts upgrading the firmware.
⁄
• For how to update the firmware, access our web site.
http://www.kenwood.com/cs/ce/
<DEMO MODE>
ß
Demo Mode: “DEMO MODE”
➤
“ON”*, ”OFF”
Specifies whether to enable demonstration.
Next page
3
B64-4591-00_00_en.indd 9
09.10.8 10:54:05 AM
Car audio and car goods internet store Winauto
winauto.ua
