8
AUDIO SETTINGS
While listening to any source...
1
Press the volume knob to enter
[FUNCTION]
.
2
Turn the volume knob to select
[AUDIO CONTROL]
/
[AUDIO CTRL]
, then press the
knob.
3
Turn the volume knob to make a selection (see the following table), then
press the knob.
Repeat
step
3
until the desired item is selected or activated.
4
Press and hold
to exit.
• To return to the previous hierarchy, press
.
Default:
XX
SUB-W LEVEL
–15
to
+15
(
0
):
Adjusts the subwoofer output level.
BASS LEVEL
–8
to
+8
(
0
):
Adjusts the level to memorize for each source. (Before making
an adjustment, select the source you want to adjust.)
MID LEVEL
–8
to
+8
(
0
):
TRE LEVEL
–8
to
+8
(
0
):
EQ PRO
BASS ADJUST
BASS CTR FRQ/
BASS C FRQ
60/ 80/ 100/ 200
:
Selects the center frequency.
BASS LEVEL
–8
to
+8
(
0
):
Adjusts the level.
BASS Q FACTOR/
BASS Q FCTR
1.00/ 1.25/ 1.50/ 2.00
:
Adjusts the quality factor.
BASS EXTEND
ON
:
Turns on the extended bass.
;
OFF
:
Cancels.
MID ADJUST
MID CTR FRQ/
MID C FRQ
0.5K/ 1.0K/ 1.5K/ 2.5K
:
Selects the center frequency.
MID LEVEL
–8
to
+8
(
0
):
Adjusts the level.
MID Q FACTOR/
MID Q FCTR
0.75/ 1.00/ 1.25
:
Adjusts the quality factor.
TRE ADJUST
TRE CTR FRQ/
TRE C FRQ
10.0K/ 12.5K/ 15.0K/ 17.5K
:
Selects the center frequency.
TRE LEVEL
–8
to
+8
(
0
):
Adjusts the level.
PRESET EQ
NATURAL/ USER/ ROCK/ POPS/ EASY/ TOP40/ JAZZ/ POWERFUL
:
Selects
a preset equalizer suitable to the music genre. (Select
[USER]
to use the
customized bass, middle, and treble settings.)
BASS BOOST
B.BOOST LV1/ B.BOOST LV2/ B.BOOST LV3
:
Selects your preferred bass
boost level.
;
OFF
:
Cancels.
LOUDNESS
LOUDNESS LV1
/
LOUD LV1
/
LOUDNESS LV2
/
LOUD LV2
:
Selects your
preferred low and high frequencies boost to produce a well-balanced sound at
a low volume level.
;
OFF
:
Cancels.
BALANCE
L15
to
R15
(
0
):
Adjusts the left and right speaker output balance.
FADER
R15
to
F15
(
0
):
Adjusts the rear and front speaker output balance.
SUBWOOFER
SET/ SUB-W SET
ON
:
Turns on the subwoofer output.
;
OFF
:
Cancels.
DETAILED SET/ DETAIL SET
HPF
For
KDC-4757SD
:
THROUGH
:
All signals are sent to the speakers.
;
100HZ
/
120HZ
/
150HZ
:
Audio signals with frequencies higher than 100 Hz/ 120 Hz/ 150 Hz
are sent to the speakers.
LPF SUBWOOFER/
LPF SUB-W
THROUGH
:
All signals are sent to the subwoofer.
;
85HZ
/
120HZ
/
160HZ
:
Audio signals with frequencies lower than 85 Hz/ 120 Hz/ 160 Hz are
sent to the subwoofer.
SUB-W PHASE
REVERSE
/
REV
(180°)/
NORMAL
/
NORM
(0°):
Selects the phase of
the subwoofer output to be in line with the speaker output for optimum
performance. (Selectable only if a setting other than
[THROUGH]
is selected
for
[LPF SUBWOOFER]
/
[LPF SUB-W]
.)
SUPREME SET
ON
:
Creates realistic sound by interpolating the high-frequency components
that are lost in AAC/MP3/WMA audio compression.
;
OFF
:
Cancels.
(
Selectable
only when playing back an AAC/MP3/WMA disc, a USB device or an SD card,
except iPhone/iPod.)
VOLUME OFFSET/
VOL OFFSET
(Default:
0
)
–8
to
+8
(for AUX) ;
–8
to
0
(for other sources):
Presets the volume
adjustment level of each source. (Before adjustment, select the source you
want to adjust.)
•
[SUB-W LEVEL]
/
[SUBWOOFER SET]
/
[SUB-W SET]
/
[LPF SUBWOOFER]
/
[LPF SUB-W]
/
[SUB-W PHASE]
is selectable only if
[SWITCH PRE]
is set to
[SUB-W]
. (
➜
4
)
•
[SUB-W LEVEL]
/
[LPF SUBWOOFER]
/
[LPF SUB-W]
/
[SUB-W PHASE]
is selectable only if
[SUBWOOFER SET]
/
[SUB-W SET]
is set to
[ON]
.
EN_KDC-4757SD[E0]2.indd 8
EN_KDC-4757SD[E0]2.indd 8
8/23/12 5:54:42 PM
8/23/12 5:54:42 PM
