Kenwood KDC-5080R, Instruction Manual

"Kex"/"ec"/"dB" : Recalling the kenwood preset sound setting

Press the preset buttons (#1-6).
Settings: #1;Flat, #2;Rock, #3;Pops/Top40, #4;Jazz, #5;Easy,  

#6;Scan of #1-5

Adjust various parameters of sound quality.

Press the AUD button to enter the control mode.

Selecting mode

Press either the FM or AM button.
Each time the button is pressed, the adjustment mode will
change.
Please refer to the following for the contents of the
adjustment modes.

Source tone memory

Each source (tape, CD, MD, FM, AM, and disc changer) has its
own memory in which to store the bass and treble tone settings.
The settings made for a particular source are then recalled
automatically whenever you use that source (e.g., FM mode uses
the tone settings made for FM, AM for AM, etc.).

Adjust each mode

Press the 

4

/

¢

button.

Please refer to the following for the adjusting values.

Press the AUD button to end the control mode.

4

3

NOTE

2

1

Audio Control Setting

This function amplifies low and high tones when the volume is
turned down.
The LOUD indicator lights up, when the loudness function is
on.

Turning Loudness On/Off:

Hold down the LOUD button for one second or more to switch
the loudness on and off.

Loudness

Switching Modes:

Each time you press the SRC button, the mode switches as
follows:

Selecting the standby mode:

Press the SRC button repeatedly to select to "ALL OFF" .
When "ALL OFF" is displayed, the standby mode is turned on.
The standby mode turns all functions off although leaving the
unit’s power on. Use this mode when you want to have the
display illuminated but do not want to listen to anything.

• The mode switches to the next mode from any mode which

cannot be used.

• The external disc control mode will differ depending on the unit

that is connected.

• The AUX mode is available only when the changer / AUX

switching adapter (KCA-S210A or CA-C1AX) or CD changer
(KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82) is
connected to this unit.
During the AUX mode, "AUX" / AUX-name will show in the
display. When the CA-C1AX is being used, the AUX Mode will
replace the External Disc Control Mode.

Presetting AUX-name

In the AUX mode, press the NAME.S button for two seconds or
more. "NAME SET" is display and AUX-name mode is entered.
Input the characters, referring to the section on "Presetting Disc
Names (DNPS)" (page22).

NOTE

NOTE

▼

Tuner mode

▼

CD mode

▼

External disc control mode 1

▼

External disc control mode 2/AUX mode

▼

Standby mode

Switching Modes

General features

— 8 —

English