background image

Information on Disposal of Old 

Electrical and Electronic Equipment 

and Batteries (applicable for 

EU countries that have adopted 

separate waste collection systems)

  Products and batteries with the 

symbol (crossed-out wheeled bin) 
cannot be disposed as household 
waste. 
Old electrical and electronic 
equipment and batteries should 
be recycled at a facility capable 
of handling these items and their 
waste byproducts. 
Contact your local authority for 
details in locating a recycle facility 
nearest to you. 
Proper recycling and waste disposal 
will help conserve resources whilst 
preventing detrimental effects on 
our health and the environment. 
Notice:  The sign “Pb” below the 

symbol for batteries 
indicates that this battery 
contains lead.

This Product is not installed by the 
manufacturer of a vehicle on the production 
line, nor by the professional importer of a 
vehicle into an EU Member State.

The marking of products using 

lasers

CLASS 1  

LASER PRODUCT

The label is attached to the chassis/case and 
says that the component uses laser beams 
that have been classified as Class 1.
It means that the unit is utilizing laser beams 
that are of a weaker class. There is no danger 
of hazardous radiation outside the unit.

Declaration of Conformity with regard to the EMC Directive 2004/108/EC

Declaration of Conformity with regard to the R&TTE Directive 1999/5/EC

Manufacturer: 

JVC KENWOOD Corporation

3-12, Moriyacho, Kanagawa-ku, Yokohama-shi, Kanagawa 221-0022, Japan

EU Representative’s: 

Kenwood Electronics Europe BV

Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands

English

Hereby, Kenwood declares that this unit KDC-BT42U/ KDC-BT32U is in 
compliance with the essential requirements and other relevant provisions 
of Directive 1999/5/EC.

Français

Par la présente Kenwood déclare que l’appareil KDC-BT42U/ KDC-BT32U est 
conforme aux exigences essentielles et aux autres dispositions pertinentes 
de la directive 1999/5/CE.
Par la présente, Kenwood déclare que ce KDC-BT42U/ KDC-BT32U est 
conforme aux exigences essentielles et aux autres dispositions de la 
directive 1999/5/CE qui lui sont applicables.

Deutsch

Hiermit erklärt Kenwood, dass sich dieser KDC-BT42U/ KDC-BT32U in 
Übereinstimmung mit den grundlegenden Anforderungen und den anderen 
relevanten Vorschriften der Richtlinie 1999/5/EG befindet. (BMWi)
Hiermit erklärt Kenwood die Übereinstimmung des Gerätes KDC-BT42U/ 
KDC-BT32U mit den grundlegenden Anforderungen und den anderen 
relevanten Festlegungen der Richitlinie 1999/5/EG. (Wien)

Nederlands

Hierbij verklaart Kenwood dat het toestel KDC-BT42U/ KDC-BT32U in 
overeenstemming is met de essentiële eisen en de andere relevante 
bepalingen van richtlijn 1999/5/EG.
Bij deze verklaat Kenwood dat deze KDC-BT42U/ KDC-BT32U voldoet aan 
de essentiële eisen en aan de overige relevante bepalingen van Richtlijn 
1999/5/EC.

Italiano

Con la presente Kenwood dichiara che questo KDC-BT42U/ KDC-BT32U è 
conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite 
dalla direttiva 1999/5/CE.

Español

Por medio de la presente Kenwood declara que el KDC-BT42U/ KDC-BT32U 
cumple con los requisitos esenciales y cualesquiera otras disposiciones 
aplicables o exigibles de la Directiva 1999/5/CE.

Português

Kenwood declara que este KDC-BT42U/ KDC-BT32U está conforme com os 
requisitos essenciais e outras disposições da Directiva 1999/5/CE.

Polska

Kenwood niniejszym oświadcza, że KDC-BT42U/ KDC-BT32U spełnia 
zasadnicze wymogi oraz inne istotne postanowienia dyrektywy 1999/5/EC.

Český

Kenwood timto prohlasuje, ze KDC-BT42U/ KDC-BT32U je ve shode se 
zakladnimi pozadavky a s dalsimi prislusnymi ustanoveni Narizeni vlady 
c. 426/2000 Sb.

Magyar

Alulírott, Kenwood, kijelenti, hogy a jelen KDC-BT42U/ KDC-BT32U megfelel 
az 1999/5/EC irányelvben meghatározott alapvető követelményeknek és 
egyéb vonatkozó előírásoknak.

Svenska

Härmed intygar Kenwood att denna KDC-BT42U/ KDC-BT32U stär l 
överensstämelse med de väsentliga egenskapskrav och övriga relevanta 
bestämmelser som framgår av direktiv 1999/5/EG.

Suomi

Kenwood vakuuttaa täten että KDC-BT42U/ KDC-BT32U tyyppinen laite on 
direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin 
muiden ehtojen mukainen.

Slovensko

S tem Kenwood izjavlja, da je ta KDC-BT42U/ KDC-BT32U v skladu z 
osnovnimi zahtevami in ostalimi ustreznimi predpisi Direktive 1999/5/EC.

Slovensky

Spoločnosť Kenwood týmto vyhlasuje, že KDC-BT42U/ KDC-BT32U spĺňa 
zákldné požiadavky a ďalšie prislušné ustanovenia Direktĺvy 1999/5/EC.

Dansk

Undertegnede Kenwood erklærer harved, at følgende udstyr KDC-BT42U/ 
KDC-BT32U overholder de væsentlige krav og øvrige relevante krav i direktiv 
1999/5/EF.

Ελληνικά

ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Kenwood ΔΗΛΩΝΕΙ ΟΤΙ KDC-BT42U/ KDC-BT32U 
ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ 
ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/EK.

Eesti

Sellega kinnitab Kenwood, et see KDC-BT42U/ KDC-BT32U vastab direktiivi 
1999/5/EC põhilistele nõudmistele ja muudele asjakohastele määrustele.

Latviešu

Ar šo, Kenwood, apstiprina, ka KDC-BT42U/ KDC-BT32U atbilst Direktīvas 
1999/5/EK galvenajām prasībām un citiem tās nosacījumiem.

Lietuviškai

Šiuo, Kenwood, pareiškia, kad šis KDC-BT42U/ KDC-BT32U atitinka 
pagrindinius Direktyvos 1999/5/EB reikalavimus ir kitas svarbias nuostatas.

Malti

Hawnhekk, Kenwood, jiddikjara li dan KDC-BT42U/ KDC-BT32U jikkonforma 
mal-ħtiġijiet essenzjali u ma provvedimenti oħrajn relevanti li hemm 
fid-Dirrettiva 1999/5/EC.

Українська

Компанія Kenwood заявляє, що цей виріб KDC-BT42U/ KDC-BT32U 
відповідає ключовим вимогам та іншим пов’язаним положенням 
Директиви 1999/5/EC.

Turkish

Kenwood, işbu belge ile KDC-BT42U/ KDC-BT32U numaralı bu ünitenin 
1999/5/EC Direktifi’nin özel gereksinimlerine ve ilgili diğer hükümlerine 
uygun olduğunu beyan eder.

For Turkey

Bu ürün 26891sayılı Resmi Gazete’de yayımlanan 

Elektrikli ve Elektronik Eşyalarda Bazı Zararlı 

Maddelerin Kullanımının Sınırlandırılmasına Dair 

Yönetmeliğe uygun olarak üretilmiştir.

This product complies with Directive, 

Number 26891 regarding “REGULATION ON 

THE RESTRICTION OF THE USE OF CERTAIN 

HAZARDOUS SUBSTANCES IN ELECTRICAL AND 

ELECTRONIC EQUIPMENT”.

Summary of Contents for KDC-BT32U



















Reviews: