44
|
KDC-X995/ KDC-BT948HD
Car Type Selection
You can compensate the delay of the sound arrival
time by selecting your environment from the
following car types.
Display
Overview
“OFF”
Not compensating.
“Compact”
Compact car
“Full size car”
Full size car
“Wagon”
Station wagon
“Minivan”
Minivan
“SUV”
Sport-utility vehicle
“Minivan (Long)”
Long Minivan
( : Factory setting)
1
Select the source
Pressing the [SRC] button repeatedly switches
source.
Select a source other than “STANDBY”.
2
Enter Audio Control mode
Press the [VOL] knob.
3
Enter Cabin select mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Detailed Setup”
>
“Car Type”.
4
Select the car type
Press the [
4
] or [
¢
] button.
5
Set the value
Press the [VOL] button.
6
Exit Audio Control mode
Press the [MENU] button for at least 1 second.
⁄
• You can compensate the distances in more details by
<Car Type Fine Adjustments> (page 45)
Speaker Setting
The speaker X’Over is automatically set when the
position and size of each speaker are selected from
the following items.
Speaker
Item
Range
“FRONT”
“SIZE”
Speaker Size Front
KDC-X995:
“O.E.M.”, “4inch”, “5inch”, “6 1/2inch”,
“6 3/4inch”, “7inch”, “4x6”, “5x7”, “6x8”,
“6x9”, “7x10”
KDC-BT948HD:
“Small”, “Medium”, “Large”
“LOCATION” Speaker Location Front
“Door”, “On Dash”, “Under Dash”
“TWEETER” Speaker Size Tweeter
“None”, “Use”
“REAR”
“SIZE”
Speaker Size Rear
KDC-X995:
“None”, “O.E.M.”, “4inch”, “5inch”,
“6 1/2inch”, “6 3/4inch”, “7inch”, “4x6”,
“5x7”, “6x8”, “6x9”, “7x10”
KDC-BT948HD:
“None”, “Small”, “Medium”, “Large”
“LOCATION” Speaker Location Rear
•
“Door”, “Rear Deck”
•
“2nd Row”, “3rd Row”
(Car Type:
“Minivan”, “Minivan (Long)”)
“SUB W”
“SIZE”
Speaker Size Subwoofer
KDC-X995:
“None”, “6 1/2inch”, “8inch”, “10inch”,
“12inch”, “15inch Over”
KDC-BT948HD:
“None”, “Small”, “Large”
( : Factory setting)
1
Select the source
Pressing the [SRC] button repeatedly switches
source.
Select a source other than “STANDBY”.
2
Enter Audio Control mode
Press the [VOL] knob.
3
Enter Speaker setting mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Detailed Setup”
>
“Speaker”.
4
Select the item you want to set
Operation type
Operation
Selects the item.
Turn the [VOL] knob.
Adjust each item.
Press the [
4
] or [
¢
] button.
Set the value.
Press the [VOL] button.
5
Exit Audio Control mode
Press the [MENU] button for at least 1 second.
DSP Setup
SRC
4
VOL
¢
MENU
