— 23 —
Disc source
?
CD play does not start.
52
✔
CD auto-changer input is not connected to the unit.
☞
Connect the CD auto-changer input to the unit.
✔
Power button is not turned ON.
53
☞
Turn the power button ON.
?
The specified disc does not play, but another one plays instead.
52
✔
The specified CD is quite dirty.
☞
Clean the CD.
✔
The CD is upside-down.
53
☞
Load the CD with the labeled side up.
✔
The disc is loaded in a different slot from that specified.
54
☞
Eject the disc magazine and check the number for the specified disc.
✔
The disc is severely scratched.
55
☞
Try another disc instead.
?
The specified track will not play.
58
✔
Random play or magazine random play has been selected.
☞
Turn off random play or magazine random play.
?
Cannot play CD-R or CD-RW.
60
✔
Finalization processing is not being conducted for CD-R/CD-RW.
☞
Conduct finalization processing with CD recorder.
?
Direct Track Search and Direct Disc Search can’t be done.
66-1
✔
Another function is ON.
☞
Turn Random Play or other functions OFF.
?
Track Search can't be done.
66-2
✔
For the discs first or last song.
☞
For each disc, Track Search can't be done in the backward direction
for the first song or in the forward direction for the last song.
?
Sound skips due to vibration.
67
✔
Something is touching the CD auto-changer.
☞
Keep it away from the CD auto-changer.
✔
The disc is dirty or damaged.
68
☞
If sound skips at the same part, the disc is faulty. Check and, if
possible, clean the disc.
✔
Changer unit is mounted on the a slant.
69
☞
Mount the unit so that is level.
✔
Changer unit is mounted in an unstable place.
8
☞
Mount the unit in a stable place.
✔
The angle adjustment switches are set improperly.
69
☞
Set the angle adjustment switches to the correct positions.
?
Sound quality is poor.
67
✔
The recording of the disc is poor.
☞
Try playing another disc. If the sound is good, the fault was with
the original disc.
✔
The disc is dirty or damaged.
8
☞
Check and, if possible, clean the disc.
?
No sound is heard even though the information concerning the CD
auto-changer is displayed.
67
✔
The radio volume is sets to the minimum level.
☞
Turn the radio volume up.
✔
The microcomputer does not function correctly.
68
☞
Press the Reset button of the display unit. (Page 3)
✔
The system is not connected properly.
69
☞
Connect the system properly. See <Connecting Wires to
Terminals>. (Page 20)
KDC-C521FM_C471FM_(KE)_U.S 2004.01.16 10:51 AM Page 23
