Kenwood KDC-C510FM Instruction Manual Download

Page: 27 / 30

Nothing appears on the
display.

The control output of the display unit is
not connected properly.

Connect the control output properly.

Changer unit is mounted in an
unstable place.

M ount the unit in a stable place.

Troubleshooting guide

Often, w hat appears to be a malfunction is due to user error. Before calling for
service please consult the follow ing table.

Symptom

Cause

Remedy

The pow er is not turned on.

The w iring harness fuse blow s.

Check cables for shorts, then replace the
fuse w ith one of w ith the same rating
(show n on the case).

The fader or balance is set to one side.

Adjust the fader and balance.

The unit does not w ork
properly w hen a button is
pressed.

The microcomputer malfunctions.

Press the Reset button of the display
unit.

The input/output cable or w iring
harness is connected incorrectly.

Connect the input/output cable or w iring
harness correctly. See "Connections"
(Page 22).

No sound or sound is low .

The volume level is minimum.

Raise the volume level.

Sound quality is poor.
(Sound distortion)

The volume level is too high.

Use the appropriate volume level.

CD auto-changer input is not
connected to the unit.

Connect the CD auto-changer input to the
unit.

The disc is loaded upside dow n.

Eject the disc magazine and insert the
disc correctly.

Tw o discs are inserted in a slot.

Eject the disc magazine and insert the
discs correctly.

The disc is severely damaged.

Use another disc.

The number of the slot into w hich the
disc is inserted is different from the
number of the specified disc.

Eject the disc magazine and check the
number of the specified disc.

The specified disc is not
played; a different disc is
played instead.

The specified disc is very dirty.

Check and, if possible, clean the disc.
See "Cleaning your discs" (Page 6).

CD play does not start.

Pow er button is not turned ON.

Turn the pow er button ON.

Sound skips due to vibration.

Something is touching the CD auto-
changer.

Keep it aw ay from the CD auto-changer.

The disc is dirty or damaged.

If sound skips at the same part, the disc
is faulty. Check and, if possible, clean
the disc.
See "Cleaning your discs" (Page 6).

The unit is mounted at a slant.

M ount the unit so that is level.

The angle adjustment sw itches are set
improperly.

Set the angle adjustment sw itches to the
correct positions.

Sound distortion.

A disc w ith a high recording level is
used.

Change the modulation level / dynamic
control setting.(Page 20)

lesh

tin

Downloaded from:

http://www.usersmanualguide.com/

Summary of Contents for KDC-C510FM































Search results

Summary of Contents for KDC-C510FM

Reviews:

Related manuals for KDC-C510FM

Brands by name

Popular brands

Kenwood KDC-C510FM, Instruction Manual

Search results

Summary of Contents for KDC-C510FM

Reviews:

Related manuals for KDC-C510FM

Brands by name

Popular brands