20
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
TROUBLESHOOTING
Symptom
Remedy
ANDROID
Playback is intermittent or
sound skips.
Turn off the power saving mode on the Android device.
“ANDROID ERROR” /
“NA DEVICE”
•
Reconnect the Android device.
•
Restart the Android device.
Pandora
“ADD ERROR” /
“SEARCH ERROR”
New station creation is unsuccessful.
“CHECK DEVICE”
Check the Pandora application on your device.
“NO SKIPS”
The skip limit has been reached.
“NO STATIONS”
No stations are found.
“STATION LIMIT”
The number of registered stations has reached its limit.
Retry after deleting unnecessary stations from your device.
“CONNECT ERROR”
Communication is unstable.
“RATING ERROR”
Registration of thumbs up/thumbs down has failed.
“LICENSE ERROR”
You try to access from a country which Pandora is not
deliverable.
Bluetooth®
No Bluetooth device is
detected.
•
Search from the Bluetooth device again.
•
Reset the unit. (
3
)
Bluetooth pairing cannot
be made.
•
Make sure you have entered the same PIN code to both
the unit and Bluetooth device.
•
Delete pairing information from both the unit and the
Bluetooth device, then perform pairing again. (
10
)
Echo or noise is heard
during a phone
conversation.
•
Adjust the microphone unit’s position. (
10
)
•
Check the [
ECHO CANCEL
] setting. (
11
)
Phone sound quality is
poor.
•
Reduce the distance between the unit and the Bluetooth
device.
•
Move the car to a place where you can get a better signal
reception.
Symptom
Remedy
Bluetooth®
Voice calling method is
not successful.
•
Use voice calling method in a more quiet environment.
•
Reduce the distance from the microphone when you
speak the name.
•
Make sure the same voice as the registered voice tag is
used.
Sound is being
interrupted or skipped
during playback of a
Bluetooth audio player.
•
Reduce the distance between the unit and the
Bluetooth audio player.
•
Turn off, then turn on the unit and try to connect again.
•
Other Bluetooth devices might be trying to connect to
the unit.
The connected
Bluetooth audio player
cannot be controlled.
•
Check whether the connected Bluetooth audio player
supports Audio/Video Remote Control Profile (AVRCP).
(Refer to the instructions of your audio player.)
•
Disconnect and connect the Bluetooth player again.
“DEVICE FULL”
The number of registered devices has reached its limit.
Retry after deleting an unnecessary device. (
14
,
DEVICE DELETE
)
“N/A VOICE TAG”
Make sure the same voice as the registered voice tag is
used.
“NOT SUPPORT”
The connected phone does not support Voice Recognition
feature.
“NO ENTRY” /
“NO PAIR”
There is no registered device connected/found via
Bluetooth.
“ERROR”
Try the operation again. If “ERROR” appears again, check if
the device supports the function you have tried.
“NO INFO”
Bluetooth device cannot get the contact information.
“HF ERROR XX” /
“BT ERROR”
Reset the unit and try the operation again. If this does not
solve the problem, consult your nearest service center.
JS_KWD_KDC_U563BT_MN_EN_01.indd 20
JS_KWD_KDC_U563BT_MN_EN_01.indd 20
7/7/2014 1:52:05 PM
7/7/2014 1:52:05 PM
