English
|
15
Function of remote control
Direct access tuning
You can search for a station directly by entering
frequency.
1
Enter the Direct access tuning mode
Press the [DIRECT] button on the remote
control.
“– – – –” is displayed.
2
Enter the frequency
Press the number buttons on the remote
control.
Example:
Desired frequency
Press the following buttons
92.1 MHz (FM)
[9], [2], [1]
810 kHz (AM)
[8], [1], [0]
3
Search for frequency
Press the [
4
] or [
¢
] button on the remote
control.
Canceling Direct access mode
Press the [ ] button on the remote control.
Frequency Step Setting
Changing the tuning frequency step.
The original setting is FM band 50 kHz, and AM
band 9 kHz.
1
Turn the power OFF
Press and hold the [SRC] button.
2
Switch the frequency step
While pressing the [PRESET] button and [ ]
button, press the [SRC] button.
Release your fingers from the button after the
display appears.
The frequency step changes to FM band 200 kHz,
and AM band 10 kHz.
⁄
•
When the same operation is repeated, the frequency step
returns to the original setting.
•
When the frequency step is changed, the frequencies in the
memory are deleted.
12Stepup_B64-4922-00_02_M_en.indd 15
12/01/30 11:08
