18
|
KDC-U7053BT/ KDC-U7053BTL
Display settings
Display & Illumination setting
You can set the display and illumination.
1
Enter the Function setting mode
Press and hold the Control knob.
2
Select the Display & Illumination setting item
Select the following items using the Control
knob.
“Settings” > “DISP&ILLUMI”
3
Select a desired Display & Illumination setting
item
Turn the Control knob to select Display &
Illumination setting item, and then press the
Control knob.
Display
Description
“DISP&ILLUMI”
“Display Dimmer” Dims the display part in conjunction with the
light switch of the vehicle.
“Auto”
: Dims the display in conjunction with
the Light switch of the vehicle.
“Manual1”
: Dims the display constantly.
“Manual2”
: Dims the display darker than that
in the Manual1 mode.
“OFF”
: Does not dim the display.
“Contrast”
Sets the display contrast.
“1” – ”10” – “30”
“DISP NEGA/POSI” Switches the panel display between positive
and negative modes.
“NEGA1”
: Displays the text in the negative
mode.
“NEGA2”
: When the interior light is off, the
text is displayed in the negative
mode; when the interior light is on,
the text is displayed in the positive
mode.
“POSI1”
: Displays the text in the positive
mode.
“POSI2”
: When the interior light is off, the text
is displayed in the positive mode;
when the interior light is on, the text
is displayed in the negative mode.
“Text Scroll”
Sets the method of scrolling to view hidden
texts.
“Auto”
: Scrolls.
“Once”
: Scrolls once.
“OFF”
: Does not scroll.
“BT DVC Status”
You can display the connection status, signal
strength, and battery level.
: Battery level of cell-phone.
: Signal strength of cell-phone.
“ILLUMI Dimmer”
Reduces the key Illumination brightness.
“Auto”
: Dims the illumination in conjunction
with the Light switch of the vehicle.
“Manual1”
: Dims the illumination constantly.
“Manual2”
: Dims the illumination darker than
that in the Manual1 mode.
“OFF”
: Does not dim the illumination.
“ILLUMI Effect”
Sets whether the key illumination color is
changed in conjunction with the key operation.
“ON” / “OFF”
( : Factory setting)
4
Determine the Display & Illumination setting
Turn the Control knob to select a desired
setting, and then press the Control knob.
The previous item is displayed.
5
Exit the Function setting mode
Press and hold the [ ] button.
12Stepup_B64-4922-00_02_M_en.indd 18
12/01/30 11:08
