33
hints and tips
fault codes
Indicator light flashes
Possible Causes
Remedy
P1
P2
P3
P4
P5
Inadequate water
supply
• Make sure the water input tap is totally
open and that there is no water cut.
• Close the water input tap, separate the
water input hose from the tap and clean
the filter at the connection end of the
hose.
• Restart your machine, contact your
service
agent if the error resumes.
Shut off valve fault
• Close the tap.
• Contact the service.
The waste water
in the machine
cannot be
discharged
• Water discharge hose is clogged.
• The filters of your machine might be
clogged.
• Power off-on your machine and activate
the program cancellation command.
• If the error continues, contact your
service agent.
Intended water
temperature could
not be reached
faulty heater
• Contact your service agent.
Alarm is active
against water
overflow
• Power off your machine and close the
tap.
• Contact your service agent.
Faulty electronic
card
• Contact your service agent.
Overheating
• Contact your service agent.
Faulty heater
sensor
• Contact your service agent.
• Repairs should only be carried out by a qualified technician in strict accordance with
current local and national safety regulations. Unauthorised or incorrect repairs could
cause personal injury or damage to the unit.
• Before calling for service, please refer to Hints and Tips to solve some general problems
by yourself.
Kenwood Freestanding Dishwasher KDW60T18/X18 Manual.indd 33
07/06/2018 15:59