5
installation
1. Please ensure the dishwasher is installed
by a qualified technician. Refer to the tools
required.
location
When selecting a position for your
freestanding dishwasher you should make
sure the installation surface is flat and
firm, and the room is well ventilated. Avoid
locating your dishwasher near a heat source,
eg. cooker, boiler or radiator. Extreme cold
ambient temperatures may also cause the
appliance not to perform properly. This
dishwasher is not designed for use in a garage
or outdoor installation.
Do not drape the dishwasher with any
covering. When installing, ensure that free
space is left at the sides.
2. Ensure there is clearance each side of the
unit to allow slight sideways movement for
servicing when required. Good levelling is
essential for correct closure and sealing
of the door. When the unit is correctly
levelled, the door should not catch the
inner liner on either side of the cabinet.
The adjustable feet may be loosened or
tightened in order to obtain the optimum
levelling of the unit.
The dimension of the dishwasher is 550(W)
x 500(D) X 438(H) in mm. The figure
outlines the minimum dimensions required
to accommodate the table top dishwasher.
Protect plastic parts and cables from high
temperatures.
All parts removed must be saved to
do the reinstallation in the future.
Ensure the dishwasher is unplugged
and empty. We recommend that 2
people handle the dishwasher during
installation.
unit in mm
550mm
438mm
500mm
150mm or more
50mm or more
150mm or more
50mm
or
more
installation
KDWTTB10_IB_final110317.indd 5
21/03/2011 10:04 AM