24
ERROR CODE ON THE DISPLAY/S
If an error message appears on the
display/s (the display/s show/s “
F
” and
another character alternating - e .g . “
F
” and
“
A
”, “
F
” and “
0
”, . . . . .) :
1 . Disconnect the cooktop from the
mains .
2 . Reconnect the cooktop and turn it on .
3 . Wait for about two minutes and if the
problem does not appear the cooktop
can be used .
4 . If the problem does not disappear
repeat step from 1 to 3 .
5 . If the problem continues, disconnect
the cooktop from the mains and contact
your Authorised Service Centre .
Important:
In the case of error message
“
F
” and “
L
”, “
F
” and “
C
” or “
F
” and “ ”
see notes at pages 9, 10 .
DISPLAY/S OFF OR NOT
CORRECTLY OPERATING
If a display or the displays are only
partially lit or not lit.
1 . Switch off the cooktop and disconnect
it from the mains .
2 . Reconnect the cooktop and turn it on .
3 . Wait for about two minutes and if the
problem does not appear the cooktop
can be used .
4 . If the problem does not disappear
repeat step from 1 to 3 .
5 . If the problem continues, disconnect
the cooktop from the mains and contact
your Authorised Service Centre .