31
hints and tips
fault code
codes
possible causes
remedy
F1
Alarm is active against water
overflow
• Power off your machine and close the tap.
• Contact the service.
F2
The waste water in the machine
cannot be discharged
• Water discharge hose is clogged.
• The filters of your machine might be clogged.
• Power off-on your machine and activate the program
cancellation command.
• If the error continues, contact the service.
F3
Error of continuous water input
• Close the tap.
• Contact the service.
F5
Inadequate water supply
• Make sure the water input tap is totally open and
that there is no water cut.
• Close the water input tap, separate the water
input hose from the tap and clean the filter at the
connection end of the hose.
• Restart your machine, contact the service if the error
resumes.
F6
Faulty heater sensor
• Contact the service.
F7
Overheating error (temperature
in the machine is too high)
• Contact the service.
F8
Heater error
• Contact the service.
F9
Divisor position error
• Contact the service.
FE
Faulty electronic card
• Contact the service.
• Repairs should only be carried out by a qualified technician in strict accordance with
current local and national safety regulations. Unauthorised or incorrect repairs could
cause personal injury or damage to the unit.
• Before calling for service, please refer to Hints and Tips to solve some general problems
by yourself.