33
* Images are for reference only. Please refer to your individual model for details.
hints and tips
fault codes
codes
possible causes
remedy
F1
Water overflow warning
• Turn the power to the machine off and close the tap.
• Contact service.
F2
Waste water in the machine
cannot be discharged
• Water discharge hose is clogged.
• The filters might be clogged.
• Power off-on your machine, then press and hold
down the
P
button for 3 seconds.
• If the error continues, contact service.
F3
Continuous water input
• Close the tap.
• Contact service.
F5
Inadequate water supply
• Make sure the water input tap is totally open and
that there is no water cut.
• Close the water input tap, separate the water
input hose from the tap and clean the filter at the
connection end of the hose.
• Restart your machine, contact service if the error
continues.
F6
Faulty heater sensor
• Contact service.
F7
Overheating (temperature in the
machine is too high)
• Contact service.
F8
Heater error
• Contact service.
F9
Divisor position error
• Contact service.
FE
Faulty electronic card
• Contact service.
• Repairs should only be carried out by a qualified technician in strict accordance with
current local and national safety regulations. Unauthorised or incorrect repairs could
cause personal injury or damage to the unit.
• Before calling for service, please refer to Hints and Tips to solve some general problems
by yourself.
problem
possible causes
remedy
The dishwasher does not start.
The door is not properly closed.
Close the door firmly.
The unit is not connected to
the mains.
Insert the plug to the mains.
The unit is not switched on.
Press the
ON/OFF
button and
select a programme.
The drain pump is not
working properly.
The anti-flooding system
has operated.
• Disconnect from the mains.
• Disconnect the water inlet.
• Call a qualified technician.
technical problems
KID60S17_IB.indd 33
30/05/2017 12:41