Kenwood KR-797 Instruction Manual Download

Page: 15 / 32

KR-897/KR-797 (En)

Sound adjustment functions

: Keys or controls to be used in this operation

If the SURROUND, 3STEREO or S.DIRECT indicators are lit, press the

STEREO

key to turn them OFF.

The displayed value changes.

Display when “BASS” is selected.

Adjust the balance.

Press the SETUP key to return to the
previous input selector display.

Ensure that the SRS 3D and S.DIRECT
indicators are not lit.

SOUND

LEVEL

CONTROL

Select the tone mode to be adjusted (from
BASS, MIDDLE and TREBLE).

Adjust the tone

To increase
level

To decrease
level

Ensure that the SURROUND, 3 STEREO
and S.DIRECT indicators are off.

LEVEL

CONTROL

To decrease
the right
channel sound

SETUP

Adjusting the left/right sound balance

Adjusting the tone

Press the SETUP key.

To decrease
the left
channel sound

POWER

PHONES

DOWN

AUTO

DIRECT MEMORY

PRO LOGIC

STEREO

SRS 3D

N.B.

SOURCE

DIRECT

P.CALL

3 STEREO

TUNING

TAPE2

MONITOR

POWER

DISK SKIP

+10

SOUND

CENTER

MODE

A/B +100

TUNER

PHONO

VIDEO2

MUTE

AV AUX

REMOTE CONTROL UNIT

RC-R0505

4 ¢

AUTO

BAND

P.CALL

VOLUME

CONTROL

STANDBY

SPEAKERS

SRS

SPEAKERS

INPUT SELECTOR

VOLUME CONTROL

+10

AUDIO-VIDEO SURROUND RECEIVER KR-897

BAND DIMMER

VIDEO1

TAPE1

SETUP

TAPE2

MONITOR

LEVEL

CONTROL

LISTEN
MODE

B A S S

- 2

SURROUND

3 STEREO

S.DIRECT

Adjustment of SRS (Sound Retrieval System) 3D Stereo.

The level can be adjusted between -8 and
+8 with an increment or decrement of 2
per press.

BASS

: Mode for adjusting the low frequencies.

MIDDLE

: Mode for adjusting the middle frequencies.

TREBLE

: Mode for adjusting the high frequencies.

End of setting

Each press of the key switches the modes as follows:
(When the SRS 3D Stereo is OFF)

If the S.DIRECT indicator is lit, press the

S.DIRECT

key to turn it off.

If the SRS 3D indicator is lit, press the

SRS 3D

key to turn it off.

S.DIRECT

SRS

Make sure that the
light is out.

- - - y t - -

Position of the right speaker

Indicates the center

Position of the left speaker

Indicates the balance setting

Make sure that the light is out.

KR-897̲797(En).pm5

07.6.11, 5:06 PM

Summary of Contents for KR-797

































Search results

Summary of Contents for KR-797

Reviews:

Related manuals for KR-797

Brands by name

Popular brands

Kenwood KR-797, Instruction Manual

Search results

Summary of Contents for KR-797

Reviews:

Related manuals for KR-797

Brands by name

Popular brands