21
EN
Recording audio (analog sources)
INPUT SELECTOR
Recording
3
Press and hold the DIMMER key for more than 2 seconds to select
the A-REC or M-REC mode during digital input.
1
Rec mode off :
The digital input record mode is switched off.
2
A-REC mode
:
The digital input signals (DTS, Dolby Digital,
or PCM) are identified automatically and
converted into stereo signals that are ready
for recording.
3
M-REC mode
:
The input signal type at the moment this
mode is selected is held throughout this
mode.
• When the
M-REC mode
is selected, the digital input signal is
converted to stereo signals (down-mix). But once the digital signal
is changed to other signal, no signal is output.
• When the
A-REC mode
is selected, the digital input signal is
converted to stereo signals even if the digital signal is changed.
For A-REC mode:
For M-REC mode:
4
Start playback, then start recording.
• If the audio reproduction stops in the middle due to change in the
input signals, etc., press the
DIMMER
key.
Recording a music source
1
Use the INPUT SELECTOR knob to select the source (other than
“MD/TAPE”) you want to record.
2
Set the MD or TAPE recorder to record.
3
Start playback, then start recording.
Recording video
1
Use the INPUT SELECTOR knob to select the video source (other
than “VIDEO1”) you want to record.
2
Set the video deck connected to VIDEO 1 to record.
• Select the REC MODE to record a digital input source.
3
Start playback, then start recording.
• Recording may not be normal for some video software. This is due to
the copy guard condition.
‹
Recording audio (digital sources)
Switch on the
REC mode
to record a digital input source.
Usually use the
A-REC
(Auto-Record) mode
to record audio input
sources. When the digital mode changes during recording in the
A-REC
mode
, the audio input source may be interrupted momentarily.
Recording music in A-REC or M-REC mode
DIMMER
INPUT SELECTOR
1
Use the INPUT SELECTOR knob to select the source (CD/DVD,
DVD/6CH or VIDEO2) you want to record.
2
Set the MD or TAPE recorder to record.
5632_16_25_EN
06.4.20, 2:00 PM
21
