10
EN
ENGLISH
Names and functions of parts
1 2 3
5
4
1
Power key
Used for setting the unit to On or Standby.
2
standby indicator
The indicator lights when the system power is
set to the standby
mode.
3
POWER ON/OFF switch
4
CHANNEL SELECTOR key
Used for switching the amplifier between 4 channels (25 W x 4)
and 2 channels (50 W x 2).
• The channel automatically switches according to the
listening mode when connecting to C-AX7 or M-AX7 with
the system control code (accessory).
• This key does not work when Dolby Digital or DTS signal
are input when selecting "5.1CH SYSTEM" of the "SPEAKER
MODE" setting.
5
Displays
The channel under operation is displayed.
Standby mode
When the standby indicator is lit, a small amount
of power is supplied to the system to back up the
memory. This status is referred to as the standby
mode.
