EN
15
ENGLISH
Symptom
Remedy
The power does not become ON or
channel switching is not possible.
• Insert the system control cord securely all the way.
Channel switching is not possible when
the CHANNEL SELECTOR key is pressed.
• This key does not work when Dolby Digital or DTS signal are input when selecting
"5.1CH SYSTEM" of the "SPEAKER MODE" setting.
The standby indicator blinks in red and
no audio is output.
• A speaker cord is short-circuited. Turn the power off and reconnect the speaker
cord.
• There may be an internal defect. Switch it OFF, unplug the power cord and call for
service.
Troubleshooting
Troubles are not always due to malfunction or failure of the system. In case of a trouble, check the following tales
before calling for service.
"Stereo (EQ)"
Stereo (EQ ON)
––
"PL II Movie"
*
Pro Logic II Movie
"PL II"
"PL II Music"
*
Pro Logic II Music
"PL II"
"PL II Game"
*
Pro Logic II Game
"PL II"
"Pro Logic"
*
Pro Logic
"PL"
*
It can not be selected when the sampling frequency is
96 kHz signal.
When you select Stereo
• Dolby Digital or DTS signal having more channels than
the maximum number of playback channels available
using this model’s current settings is input, downmixing
is performed to match the number of available channels.
Surround indicator
The surround indicator of C-AX7 lights according
to the number of signal channels recorded in the
selected sources.
*1
LFE= Low Frequency Effects. This channel delivers
separate non-directional bass signals to the subwoofer
for more dynamic deep bass sound effects.
*
The "S" indicator lights when the surround component
consists of a single channel.
Front right
Front left
Center
Surround right
Surround left
LFE
*1
Surround
*
Information on Disposal of Old Electrical
and Electronic Equipment (applicable for
EU countries that have adopted separate
waste collection systems)
Products with the symbol (crossed-out
wheeled bin) cannot be disposed as
household waste.
Old electrical and electronic equipment
should be recycled at a facility capable of
handling these items and their waste by
products.
Contact your local authority for details in locating a
recycle facility nearest to you.
Proper recycling and waste disposal will help conserve
resources whilst preventing detrimental effects on our
health and the environment.
Care and storage of main unit
7
Do not place in the following locations.
Place exposed to direct sunlight.
¶
Place subjected to excessive humidity or dirt.
¶
Place exposed to direct heat from heating equipment.
¶
7
When a main unit becomes dirty
When the front panel or case gets dirty, wipe with a soft
dry cloth. Do not use lacquer thinner, benzine, alcohol
or contact revitalizer for these chemicals will cause
discoloration or deformation.
