Setup Menu
Touch Panel Adjust
You can adjust the touch panel operations.
If
is not shown, touch
or
to display it.
1
Adjusts the volume.
2
Returns to the Control screen of the previous
source.
3
Calls the Sound Effects Menu. (see page 68)
4
Calls the Setup Menu.
5
Allows you to start touch panel adjustment.
1
Cancels the adjustment and returns to the Touch
Panel Adjust screen.
2
Resets to the initial status.
Set
Start to adjust the touch panel
2
Next
Prev.
Touch
Touch
Display the Touch Panel Adjust screen
1
Touch the center of left lower and right upper
when requested.
Clock
Adjusts the clock time
If
is not shown, touch
or
to display it.
1
Adjusts the volume.
2
Returns to the Control screen of the previous
source.
3
Calls the Sound Effects Menu. (see page 68)
4
Calls the Setup Menu.
5
Clock time display.
6
Adjusts hours.
7
Adjusts minutes.
8
Sets "00" minute.
Setup examples: 3:00~3:29
→
3:00
3:30~3:59
→
4:00
9
Sets the clock time in synchronous with the time
data sent from the RDS station. <Function of KVT-
935DVD (PAL TV type)> (
On
)
When turned "On", the synchronous mode starts
and the clock cannot be adjusted manually.
Adjust the clock time
2
Next
Prev.
Clock
Clock
Display the Clock Screen
1
Adjustment
3
English 63
62 English
English
Set
Off
2
3
4
5
1
1
1
1
2
1
1
1
1
3
4
5
6
6
7
7
8
9
Reset
Cancel
2
1
Security Code Setup
You can set a security code to protect your
receiver system against theft.
When the Security Code function is activated, the
code can't be changed and the function can't be
released.
Note, the Security Code can be set as the 4 digit
number of your choice.
If
is not shown, touch
or
to display it.
1
Adjusts the volume.
2
Returns to the Control screen of the previous
source.
3
Calls the Sound Effects Menu. (see page 68)
4
Calls the Setup Menu.
5
Allows you to start security code registration.
If you have already completed the code
registration, the
is not displayed.
Set
Start the security code registration
2
Set
Next
Prev.
Security
Security
Display the Security Code Setup screen
1
1
Enters a security code.
2
Clears your entry.
3
Cancels the registration and returns to the
Security Code Setup screen.
4
Enters the security code.
—
Input a four-digit number.
Reenter the same security code as that you have
entered in Step 3 for confirmation.
If you enter a different security code, the screen
returns to Step 3 (for the first code entry).
Your security code has been registered.
If you press the Reset button or if you disconnect
your Receiver from the battery after the code
registration, you need to enter the registered
security code. See below for details.
If you have pressed the Reset button or if you
have disconnected the Receiver from battery...
—
You must enter the same security code as that you
have entered in Step 3 above.
Now, you can use your Receiver.
Enter
Enter the security code
2
9
0
Enter the correct security code
1
Enter
Register the security code again
6
Reenter the security code
5
Enter
Register your security code
4
9
0
Enter a security code
3
Set
2
1
1
1
1
3
4
5
Enter
Cancel
PassWord
6
5
4
9
8
7
0
3
2
1
＊＊＊＊
1st
Clear
2
1
3
4
Summary of Contents for KVT-935DVD
Page 1: ......
