LZ-651W
6
1 How to entered to TEST mode
At the time of NAVI screen or AV IN screen, key is pushed in
order of the following by remote control unit.
“
↓
”
e
“VOL
▲
(+)”
e
“VOL
▼
(-)”
e
“
→
”
e
“
←
”
e
“VOL
▼
(-)”
e
“VOL
▲
(+)”
*
←
,
↑
,
→
,
↓
, mark are 3D Keys
2 EXIT for TEST mode
POWER OFF
→
ON or ACC OFF
3 Setup mode (starting)
Display mode
: FULL
Video source
: AV-IN
Audio source (SP mode) : NOMAL
VOLUME
: 21
SCREEN CONTROL
• BRIGHT
: MAX
• TINT
: CENTER
• COLOR
: CENTER
• CONTRAST
: CENTER
• BLACK
: CENTER
• DIMMER
: MIN (-30)
SYSTEM CONTROL
• NAVI
: RGB
• AV-IN
: CAM
• BEEP
: ON
4 Adjustment of video parameter
It is function for adjusting the setting value to the video pro-
cessing IC.
The value adjusted here is saved at E2PROM, and user can-
not be changed for video parameter.
4-1 Adjustment item
Item
Display
CH
Default value
VCO FREERUN
VCOFree CH16 0x80
BLACK LIMITEER
BLimit
CH5
0xC0 (HGA:1)
WHITE LIMITEER
WLimit
CH10 0x40
BRIGHT
Bright
CH6
0x80
CONTRAST
Contras
CH13 0x80
Y GAIN
YGain
CH2
0x80
GAMMA1
Gamma1
CH11 0x80
GAMMA2
Gamma2
CH12 0x40
Rch SUB BRIGHT
RsubBri
CH8
0x80
Bch SUB BRIGHT
BsubBri
CH9
0x80
Rch SUB CONTRAST
RsubCon CH14 0x80
Bch SUB CONTRAST
BsubCon
CH15 0x80
VCOM
Vcom
CH1
0xDD
COMMON DC (FLICKER) Flicker
CH23 0x80
4-2 Basic operation
The “DIRECT” key is pushed for time of NAVI screen or AV-IN
screen in test mode (Invalid during menu, screen control, and
setup display). Cursor is expressed as red character and it is
VCO free run the Initial function. Each adjustment value is
expressed as green character.
You can choused item of the function used by remote control
cursor keys “
↑
”, “
↓
”, “
→
”, “
←
”.
It decides by the “ENTER” key. Every item can be adjusted.
Item name and setting value on the display
TEST MODE
Initial screen
Selection display
