LZ-651W
7
The key ( “
↑
”, “
↓
” ) of remote control is pushed and an adjust-
ment value is changed the whole STEP.
The “ENTER” key of remote control is pushed, setting value is
decided, and it writes in EEPROM.
Push on the “DIRECT” key cancels for adjustment value, with-
out writing in EEPROM (Contrast returns to 80H).
The “DIRECT” key is pushed and it exits from the setup mode.
4-3 OSD UN-displaying
It will be UN-displaying if the “MENU” key is pushed during
adjustment of each item in adjustment mode.
4-4 Change in the wide mode for display
During adjustment of each item in adjustment mode, push on
the MODE key changes the wide mode for display.
5 Change of screen control steps
The function makes easy to perform the test of the screen
control at the time of shipment inspection of operation. MIN
↔
CENTER
↔
MAX of each item is movable by one opera-
tion of remote control.
6 E2PROM clearance 1
(initialized of factory-shipments
condition for setup and screen control)
6-1 Operation
It pushes with “
→
”
e
“
→
”
e
“
→
” in displayed NAVI screen or
AV-IN screen in test mode.
A setup at the time of factory shipments is written in by “EN-
TER” key, and “Complete” is displayed.
If it pushes except the “ENTER” key when exit without writing
in and “Cancel” will be displayed.
6-2 Contents of initialization:
Video source
: RGB
Wide - mode
: FULL
SP source
: NORMAL
VOLUME
: 21
POWER
: OFF
SCREEN CONTROL
•
BRIGHT
: MAX
•
DIMMER
: OFF
•
TINT, COLOR, CONTRAST, BLACK : CENTER
SYSTEM CONTROL
•
NAVI
: RGB
•
AV-IN
: VD
•
BEEP
: OFF
Cautions : Video parameter does not rewrite.
FULL NTSC
Contras
80H
E2PROM CLEAR
Are You Sure?
TEST MODE
When “
↑
” is pushed once by remote control
The completion display of item adjustment
Screen display
