EN
11
Using the CD/MP3-CD/WMA-CD/USB device
Preparation
Loading a disc
1
Press CD/USB (CD/USB) button to select CD
mode.
2
Press the area marked [push open] on the top
cover to open the CD door.
3
Place a disc into the tray with the label facing
up.
Push surrounding of the disc center hole until it is
locked to the center part of the tray.
4
Close the CD door.
For a normal CD, the total playtime and total
number of tracks will appear in the display.
For an MP3-CD and WMA-CD, the total album
number and total fi le number will appear on the
display.
⁄
• To remove the disc, press the area marked
[push open]
, grasp
the disc by its edges, and carefully pull it out.
Inserting a USB device
1
Press CD/USB (CD/USB) button to select USB
mode.
2
Insert a USB device to the USB connector on the
front panel.
Playback automatically starts.
⁄
• To ensure good system performance; wait until the unit
completely reads the disc/USB device before proceeding.
• If the disc compartment is not loaded with a disc, “NO DISC” is
displayed. If the disc is unreadable, “NO PLAY” is displayed.
• If no USB device is inserted, “NO USB” is displayed. If the USB
device is unreadable, “NO DATA” is displayed.
• For audio fi les, reading time may exceed 10 seconds due
to the large number of songs compiled into one disc/USB
device.
• For audio fi les, “A” on the display represents ALBUM.
• For audio fi les, the total album number on the display
indicates the number of all the albums recorded in the disc/
USB device.
• The icon “MP3” appears only when an MP3-fi le is played. It does
not appear when playing a WMA-fi le.
Playing a disc/USB device
Press PLAY/PAUSE
6
(
6
) button to start
playback.
The track/fi le number and elapsed playing time of
the current track/fi le appear on the display.
⁄
• To interrupt playback, press
PLAY/PAUSE
6
(
6
) button.
The playing time starts fl ashing.
To resume playback, press
PLAY/PAUSE
6
(
6
) button
again.
• To stop playback, press
STOP
7
(
7
) button.
Selecting a desired track/passage
To select a desired track
Press SEARCH/TUNING
4
or
¢
(
4
or
¢
/–) button repeatedly until the desired
track appears on the display.
⁄
• If playback is stopped, press
PLAY/PAUSE
6
(
6
) button
to start playback.
• The digit buttons, 0–9 on the remote control unit can also be
used to select a track.
Press the digit buttons as shown below:
To select track 2 :
2
and
ENTER
To select track 23 :
2
,
3
and
ENTER
To select track 120 (Audio fi le only) :
1
,
2
and
0
To search for a particular passage during
playback
Press and hold SEARCH/TUNING
4
or
¢
(
4
or
¢
/–) button and released it when the
desired passage is located.
B60-5691-08̲00̲r6.indd 11
B60-5691-08̲00̲r6.indd 11
07.9.11 6:22:11 PM
07.9.11 6:22:11 PM
