20
FleetSync is an Alphanumeric 2-way Paging Function, and is a
protocol owned by JVC KENWOOD Corporation.
Note:
◆
This function is available only in analog operation.
◆
Ask your dealer for further information regarding the
NX-200S/ NX-300S.
SELCALL (SELECTIVE CALLING)
A Selcall is a voice call to a station or group of stations.
■
Transmitting (NX-200/ NX-300/ NX-200G/ NX-300G Only)
1
Select your desired zone and channel.
2
Press the key programmed as
Selcall
or
S
Status
to enter Selcall mode.
3
Press
/
to select the station you want to call.
•
On keypad models, if Manual Dialing is enabled, you can
directly enter the station ID.
4
Press
the
PTT
switch and begin your conversation.
■
Receiving
An alert tone will sound and the transceiver will enter
Selcall mode. The calling station’s ID will appear when a
Selcall is received (NX-200/ NX-300/ NX-200G/ NX-300G
Only). You can respond to the call by pressing the
PTT
switch and speaking into the microphone.
■
Identifi cation Codes
An ID code is a combination of a 3-digit Fleet number and a
4-digit ID number. Each transceiver has its own ID.
•
Enter a Fleet number (100 ~ 349) to make a group call.
•
Enter an ID number (1000 ~ 4999) to make an individual call in your fl eet.
•
Enter a Fleet number to make a call to all units in the selected
fl eet (Fleet call).
•
Enter an ID number to make a call to the selected ID in all
fl eets (Supervisor call).
FleetSync:
ALPHANUMERIC 2-WAY PAGING FUNCTION
