22
■
Reviewing Messages in the Stack Memory
(NX-200/ NX-300/ NX-200G/ NX-300G Only)
1
Press the key programmed as
Stack
, or press and hold
the key programmed as
Selcall
,
Status
, or
S
Status
to enter Stack mode.
•
The last received message is displayed.
2
Press
/
to select the desired message.
•
Message types are identifi ed as follows:
I: Caller ID, S: Status Message, M: Short Message
•
Press and hold
for 1 second or press
to cycle the
display information as follows:
ID Name > Status/Short Message > CH/GID > Time Stamp
3
Press to return to normal operation.
•
To delete the selected message, press
or #.
To confi rm the deletion, press
or
.
•
To delete all messages, press and hold
or
#
for 1 second.
To confi rm the deletion, press
or
.
SHORT/LONG MESSAGES
Received short messages are displayed the same as Status
messages and are stored in the same stack memory (NX-200/
NX-300/ NX-200G/ NX-300G Only).
To send and receive long messages, you must connect the
transceiver to a PC. Ask your dealer for details.
GPS REPORT
GPS data can be manually transmitted by pressing the key
programmed as
Send the GPS data
, or by accessing the
Menu {page 15}. If set up by your dealer, GPS data may be
automatically transmitted at a preset time interval.
•
When using the NX-200G/ NX-300G, you must fi rst connect the
VHF/ GPS antenna or UHF/ GPS antenna.
•
When using the NX-200/ NX-300/ NX-200S/ NX-300S, you must
fi rst connect an external GPS unit.
