12
TRUNKING CALLS (ANALOG)
PLACING A DISPATCH CALL
1
Select the desired zone and channel/group ID.
2
Press and hold the
PTT
switch.
3
If the “PTT Proceed” tone sounds, communication is possible; start speaking into the
microphone. Release the
PTT
switch to receive.
•
For best sound quality at the receiving station, hold the microphone approximately
1.5 inches (3 ~ 4 cm) from your mouth.
•
Your dealer can deactivate the Proceed PTT tone, if necessary. Ask your dealer for
details.
RECEIVING A DISPATCH CALL
1
When a dispatch call is received, the transceiver will automatically change to the
correct group ID and you will hear the call.
2
Readjust the volume as necessary.
PLACING A TELEPHONE CALL
1
Select the desired zone and channel/group ID.
2
Press and hold the
PTT
switch for approximately 1 second to ensure a connection.
•
Confi rm that there is a dial tone after releasing the
PTT
switch.
3
Alternatively, press the key programmed as
[Auto Telephone]
to automatically search
for a Telephone Repeater.
•
“AUTO TEL” appears on the display and the
icon blinks.
•
When the transceiver connects to a telephone line, a dial tone sounds, the
icon
appears on the display, and the transceiver enters the Off Hook state.
4
Place the call, following the instructions for making a DTMF call, starting on page 9.
5
When the called party responds, press the
PTT
switch and speak into the microphone.
Release the
PTT
switch to receive.
•
Only one person can speak at a time.
RECEIVING A TELEPHONE CALL
1
When a telephone call is received, the transceiver will automatically change to the
correct group ID and you will hear the call.
•
A ringer tone will sound when a call is received.
2
Press and hold the
PTT
switch to speak, and release it to receive.
•
Only one person can speak at a time.
DISCONNECT WITH TELEPHONE
To end the call, press the
#
key or the key programmed as
[Telephone Disconnect]
while
communicating.
