15
ADVANCED OPERATIONS
EMERGENCY CALLS
If your transceiver has been programmed with the Emergency function, you can make
emergency calls.
1
Press and hold the key programmed as
[Emergency].
•
Ask your dealer for the length of time necessary to hold this key before the
transceiver enters Emergency mode.
•
When the transceiver enters Emergency mode, it will change to the Emergency
channel and begin transmitting based on how it is set up by your dealer.
2
To exit Emergency mode, press the
[Emergency]
key again.
•
If the Emergency mode completes a preset number of cycles, Emergency mode will
automatically end and the transceiver will return to the zone and channel that was in
use before Emergency mode was entered.
Note:
◆
Your dealer can set the transceiver to emit a tone when transmitting in Emergency mode.
◆
Your dealer can set the transceiver to emit tones and received signals as normal, or mute the
speaker during Emergency operation.
SCRAMBLER (ANALOG) / ENCRYPTION (DIGITAL)
■
Secure (Encrypted) Transmission
Press the key programmed as
[Scrambler/ Encryption]
to switch the transceiver to
secure (encrypted) transmission.
• The icon appears on the display.
• Pressing the
PTT
switch after the Scrambler or Encryption function has been turned
ON encrypts the transmitted signal.
■
Selecting the Scrambler Code or Encryption Key
1
Press the key programmed as
[Scrambler/ Encryption Code]
to enter Code or Key
Selection mode.
2
Press
the / key to increase or decrease the code or key.
•
There are 16 available Scrambler codes or Encryption keys (1 ~ 16).
SIGNALING
■
Quiet Talk (QT)/ Digital Quiet Talk (DQT)
Your dealer may have programmed QT or DQT signaling on your transceiver channels.
A QT tone/ DQT code is a sub-audible tone/code which allows you to ignore (not hear)
calls from other parties who are using the same channel.
Operator Selectable Tone (OST)
If a key has been programmed with
[OST]
, you can reprogram the QT/DQT settings on
each of your channels.
