3
GETTING ACQUAINTED
FRONT AND REAR VIEWS
a
(Power) switch
Press to switch the transceiver ON or OFF.
b
/ keys
Press to activate their programmable functions {page 5}.
c
/ keys
Press to activate their programmable functions {page 5}.
d
TX/RX Indicator
Lights red while transmitting and green while receiving a signal. Flashes orange when
receiving an optional signaling call.
e
Microphone jack
Insert the microphone plug into this jack.
f
Status Indicator
Lights blue during a specifi ed mode, based on dealer programming.
g
/ S / A / <B / C> /
■
keys
Press to activate their programmable functions {page 5}.
h
Speaker
Internal speaker.
i
PTT switch
Press this switch, then speak into the microphone to call a station.
j
RF
antenna connector
Connect the RF antenna to this connector.
k
ACC connector
Connect the ACC to this connector, via the KCT-60.
l
External speaker jack
Connect an external speaker to this jack.
m
GPS antenna connector <NX-720HG/ NX-820HG/ NX-920G only>
Connect the KRA-40 GPS antenna to this connector.
n
Power input connector
Connect the DC Power Cable to this connector.
g
j
a b
c
n
m
k
ef
h
i
l
d
