10
6
(/(&7,1*
$
=
21(
$1'
&
+$11(/
*
5283
,'
Select the desired zone using
/
(default). Each zone
contains a group of channels.
Select the desired channel/group ID using the Selector knob
(default). Each channel/group ID is programmed with settings
for transmitting and receiving.
•
You can toggle the display between the zone and channel/group
ID names and number by pressing the key programmed as Display
Format, or by accessing the Menu {page 12}.
Note:
If the default settings for
/
and the Selector knob
have been changed, use the appropriate keys to select the zone
and channel/group ID.
7
5$160,77,1*
1
Select the desired zone and channel/group ID.
2
Press the key programmed as
Monitor
or
Squelch Off
to
check whether or not the channel is free.
•
If the channel is busy, wait until it becomes free.
3
Press the
PTT
switch and speak into the microphone.
Release the
PTT
switch to receive.
•
For best sound quality, hold the transceiver approximately
1.5 inches (3 ~ 4 cm) from your mouth.
Q
0DNLQJ*URXS&DOOV'LJLWDO
If a key has been programmed with
Group
or
Group +
Status
, you can select a group ID from the list to make a
call to those parties on a Conventional channel.
To select a group ID:
1
Press the key programmed as
Group
or
Group + Status
.
2
Press
/
to select a group ID/name from the list.
3
Press and hold the
PTT
switch to make the call.
•
Speak into the transceiver as you would during a normal
transmission.
Summary of Contents for Nexedge
Page 44: ......
