16
COMMON ID SETTINGS (DIGITAL)
To change the Common ID settings of a channel of Digital:
1
Follow the operating steps in Zone Selection to select the
zone type (digital).
2
Rotate
the
Selector
to your desired channel.
•
The transceiver announces Channel number.
3
Press
the
Side 1
or
Side 2
key to select Common ID setup.
•
The transceiver announces “ID” and “Channel” alternately with
each press of the
Side 1
or
Side 2
key.
4
Press and release the
PTT
switch.
•
A beep will sound and the transceiver announces Common ID
number (1-255).
5
Press
the
Side 1
or
Side 2
key to set the channel and
select the Common ID .
•
The transceiver announces Common ID number.
•
Press and hold the
Side 1
or
Side 2
key to increment/
decrement the Common ID number by 10 at a time.
•
A voice announcement will inform you of the currently selected
Common ID number.
6
Press
the
PTT
switch to save the setting.
•
A beep will sound.
•
Repeat steps 2 to 6 to set up another channel.
7
Turn the transceiver power OFF and then ON again to
activate the new settings.
Note:
◆
The transceiver will automatically return to normal operation if no
action is performed for 5 seconds.
Summary of Contents for ProTalk Digital TK-3401DE
Page 1: ...UHF DIGITAL TRANSCEIVER USER MANUAL TK 3401D B5A 0037 30 E T ...
Page 2: ......
Page 36: ... 2017 ...
