4-3-1-1 Normal Setting
As in the case of frequency setting, the CURSOR key @ and rotaty encoder @
are used to input the set value.
1) P r e s s the ^
<4
or • • key to move the c u r s o r to the MODULATION
display portion.
2) Press the ^ or • key to move the cursor to the d i g i t you want to set.
3) When the r o t a r y encoder i s r o t a t e d , the d i g i t under the c u r s o r
s t a r t s changing. Set to desired value.
4) Repeat steps 2) and 3) unti 1 the desired modulation value i s set.
* Input values exceeding the FM MODULATION r a t i n g s ( 0 — 100kHz) cannot
be set.
4-3-1-2 Direct Setting
The value can be set by using the MOD (kHz, % ) key © , the numeric keys ©
and the ENT key @.
1) When t h e MOD key © i s p r e s s e d , d i g i t s a r e e r a s e d from t h e
MODULATION display and the ENT key s LED flashes.
2) While the ENT key's LED i s flashing, use the numeric keys to enter the
desired modulat ion value. I f a wrong d i g i t i s entered, press the BS
key ® to erase the d i g i t s one by one s t a r t i n g from the l a s t input.
Then enter, then correct value.
3) When the modulat ion value has been input, press the ENT key. When the
ENT key i s pressed, the output level value displayed on the display i s
set.
* I f a modulat ion set value exceeding the range of the u n i t ' s rat ings i s
entered, the modulat ion d i s p l a y value w i l l r e t u r n to the modulat ion
value v a l i d before the input.
26
