4
TK-2118
TK-260
:K, K2
3. How to enter each mode
MODE
PROCEDURE
User Mode
Power ON
Self Programming
[MONI] + [DIAL] + POWER ON
Mode
(More than 2 sec)
Wireless Clone mode [MONI] + [LOW] + POWER ON
(More than 2 sec)
PC Mode
received commands from PC
4. Self Programming mode
After entering self-programming Mode, the radio allows 3
types of operation:
Function setting / Channel setting / All Reset
When self-programming is disable through using the FPU, self
programming mode cannot be turned ON.
1) Function setting
You can program 3 settings.
Operation:
After entering Self-Programming Mode Press the [SCAN] key.
The LCD changes to
If your radio is programmed with the selective call function,
the LCD changes to (1).
When you press the PTT switch after setting the data, you
continue to the next item. (Refer to page 7 item 5)
Selecting the setting items
Display
Setting contents
(Example)
You can enter 3 digit code
(000 to 999) using the DTMF
keys.
This feature is available only
when "Selective Call" has
been activated in the radio.
OFF: No, ON: Yes
This item is selected using
the channel selector.
Setting the Selective Call
Code
(3 Digit)
Setting the BEEP ON or OFF
Setting the [MONI] Key
Assignment
(
000 0 )
(
ON 1 )
(
0 2 ) 0: Squelch OFF,
1: Monitor Toggle,
2: Monitor Momentary,
OFF: OFF
Y o u c a n s e l e c t f r o m
among the above settings.
This item is selected using
the channel selector.
3. 如何进入每一种模式
模式类型
操作步骤
用户模式
电源ON
自台编程模式
[MONI]＋[DIAL]＋电源ON (高于2秒)
无线复制模式
[MONI]＋[LOW]＋电源ON (高于2秒)
计算机模式
从计算机接收指令
REALIGNMENT/
模式组合
4. 自台编程模式
进入自台编程模式后，手持机允许三类操作：
功能设置/信道设置/全部复位
当使用FPU设置禁止自台编程时，便不能进入自台编程模式。
1) 功能设定
您可编程三个设置。
操作：
进入自台编程模式后按[SCAN]键。
LCD变为
如果您的手持机编程选择呼叫功能，则LCD变为 (1)。
当您在设置数据后按下PTT开关，您便可继续到下一个项目。
（请翻阅7页项目5）
选择设置项目
显示
设置内容
(例如)
您可使用DTMF键输入3
位代码（000-999）。
只 有 当 “ 选 择 呼 叫 功
能”已在手持机中设定
有效时该功能才可用。
OFF: 否, ON: 是
该项目使用信道选择器
选择。
设置选择呼叫编码。
(3位数字)
设置峰鸣声ON或OFF
设置监听[MONI]按键赋值
(
000 0 )
(
ON 1 )
(
0 2 )
0: 静噪关闭，
1: 监听器触发,
2: 监听器瞬时,
OFF: 关
您可从上述设置中选择。
该项目使用信道选择器选择。
000 0
ON 1
Item number
(1)
(2)
or
000 0
ON 1
(1)
(2)
