12
SELECTING A ZONE AND CHANNEL
Select the desired zone using the
Selector
or the keys
programmed as
[Zone Up]
/
[Zone Down]
.
• The default setting for the
Selector
is
[Zone Up/ Down]
.
Select the desired channel using the
Selector
or the keys
programmed as
[Channel Up]
/
[Channel Down]
.
• The default setting for the
<B
key is
[Channel Down]
.
• The default setting for the
C>
key is
[Channel Up]
.
Names can be programmed for channels, with up to 8
characters each. The transceiver will display either the
channel name or the zone and channel number. Press the key
programmed as
[Display Character]
to toggle between the
two displays.
TRANSMITTING
1
Select your desired zone and channel (above).
2
Press the key programmed as
[Monitor]
or
[Squelch Off]
to check whether or not the channel is free.
• If the channel is busy, wait until it becomes free.
3
Press the
PTT
switch and speak into the microphone in
your normal speaking voice.
• For best sound quality at the receiving station, hold the
microphone approximately 3 ~ 4 cm from your mouth.
4
Release the
PTT
switch to receive.
RECEIVING
1
Select your desired zone and channel (above).
• Alternatively, you can turn the Scan function on if desired.
2
When you hear a caller’s voice, readjust the volume as
necessary.
