24
CALLING ALERT
The Calling Alert tone alerts party members that you are
making a call. To make a call:
1
Briefly press and hold the key programmed as
[Calling Alert]
.
• Release the key to end the tone transmission.
2
Press
the
PTT
switch and speak into the microphone in
your normal speaking voice.
KEY LOCK
Press and hold the key programmed as
[Key Lock]
for
2 seconds to lock the transceiver keys. Press and hold the
[Key Lock]
key again to unlock the keys.
•
“
LOCKED
”
appears when a key is pressed while the keys
are locked.
Note:
You can still use the following keys and functions when Key
Lock is activated:
[Emergency]
,
[Lamp]
,
[Monitor]
,
[Monitor
Momentary]
,
[Squelch Off]
,
[Squelch Off Momentary]
,
[Key
Lock]
,
PTT
.
SEND THE GPS DATA
Press the key programmed as
[Send the GPS Data]
when the
GPS unit has been installed to send your positioning data to
the base station.
EMERGENCY CALLS
If your transceiver has been programmed with the Emergency
function, you can make emergency calls.
1
Press and hold the key programmed as
[Emergency]
.
• Depending on the delay time programmed into your
transceiver, the length of time you must hold the Emergency
key will vary.
• When the transceiver enters Emergency mode, the transceiver
will change to the Emergency channel and begin transmitting
based on how the transceiver is set up.
