21
To change the functions of the
Side 1
and
Side 2
keys:
1
With the transceiver power OFF, press and hold the
Side 1
and
Side 2
keys while turning the transceiver power ON.
• Continue to hold the
Side 1
and
Side 2
keys until the LED lights
orange and the transceiver announces “Setup”.
2
Continue to press and hold the key to be reprogrammed
(either the
Side 1
or
Side 2
key), while releasing the
remaining key.
• The transceiver will announce “Table zero”.
• If you continue to hold both keys, or if you release both keys, the
operation will cancel in 20 seconds.
3
Release the key.
4
Press the
Side 1
or
Side 2
key to increment/ decrement the
number, to select the new key function.
• Table numbers and their corresponding functions are provided
in the table on page 20.
• A voice announcement will inform you of the currently selected
Table number.
5
Press the
PTT
switch to save the setting.
• A beep will sound and the transceiver will announce the new
Table number.
6
Turn the transceiver power OFF and then ON again to
activate the new settings.
Note:
The transceiver will automatically return to normal operation
if no action is performed for 20 seconds.
