2
VOICE OPERATED TRANSMISSION (VOX)
VOX operation allows you to transmit hands-free. This feature
must first be activated by your dealer, and can only be used if
you are using a supported headset. This function can be turned
off for specific channels by your dealer.
To activate VOX and set the VOX Gain level, perform the
following steps:
1
Connect the headset to the transceiver .
• The VOX function does not activate when a headset is not
connected to the accessory terminal of the transceiver.
2
With the transceiver power OFF, press and hold the
Side 1
key while turning the transceiver power ON.
3
Continue to hold the
Side 1
key until a beep sounds.
• The LED indicator lights orange.
• When the
Side 1
key is released, the transceiver will
announces the VOX Gain level.
4
Press the
Side 1
key to select the VOX Gain level of the radio.
• Press the
Side 2
key to enable or disable the VOX function for
the current channel (you can change this setting for each channel
by selecting a channel with the
Channel
selector). When turned
ON, a beep sounds. When turned OFF, a double beep sounds.
5
Press the
PTT
switch
to save the setting.
• A beep will sound.
• The transceiver announces the new VOX Gain level.
6
Turn the transceiver power OFF and the ON again to
activate VOX.
Note:
◆
The transceiver will automatically return to normal operation if no
action is performed for 20 seconds.
◆
VOX Gain level is the least sensitive and VOX Gain level is 0 is
the most sensitive.
◆
If a headset is connected to the transceiver while the VOX function
is switched ON and the VOX Gain level is configured to a higher,
more sensitive level, louder received signals may cause the
transceiver to start transmission.
