TK-3102G
25
ADJUSTMENT
Receiver Section
Item
Condition
Measurement
Adjustment
Specifi cations / Remarks
Test-
equipment
Unit
Terminal
Unit
Parts
Method
1. BPF wave
adjust
TK-3102G
(K,M)
1) TEST CH: Center
Spectrum analyzer setting
Center frequency: 460MHz
Span:
100MHz
RBW:
100kHz
VBW:
10kHz
ATT:
0dB
REF:
-20dBm
TG level: -40dBm
Spectrum
analyzer
Tracking
generator
TX-RX
ANT
TP2
TX-RX
TC201
TC202
TC203
Adjust the waveform
as shown in Fig.1.
TK-3102G
(K2,M2)
2) TEST CH: Center
Spectrum analyzer setting
Center frequency: 480MHz
Span:
100MHz
RBW:
100kHz
VBW:
10kHz
ATT:
0dB
REF:
-20dBm
TG level: -40dBmv
2. AF Level
[Wide]
1) TEST CH: Center
SSG output: -53dBm (501µV)
SSG MOD: 3kHz
SSG
Oscillo-
scope
AF VTVM
Distortion
meter
ANT
SP/MIC
connec-
tor
L212
Adjust to the maxi-
mum AF level.
[Narrow]
2) TEST CH: Center
SSG output: -53dBm (501µV)
SSG MOD: 1.5kHz
3. Sensitivity
[Wide]
1) TEST CH: Low,Center,High
SSG output: -116dBm (0.35µV)
SSG MOD: 3kHz
Check
12dB SINAD or more
[Narrow]
2) TEST CH: Center
SSG output: -116dBm (0.35µV)
SSG MOD: 1.5kHz
4. Squelch
Tight
1) TEST CH: Center
MONI:
ON
Program-
ming
software:
KPG-55D
(Windows
version:
ver.4.00
or later)
Adjust the adjust-
ment value until the
squelch closes.
The squelch must close.
2) Level 9
SSG output: -117dBm (0.32µV)
SSG MOD: 3.0kHz
5. Squelch
Open
1) TEST CH: Center
MONI:
ON
2) Level 3
SSG output: -125dBm (0.126µV)
SSG MOD: 3.0kHz
BPF-Wave
Fig. 1
ATT 0dB
A_View B_blank
MKR
10.0 MHz
0.75 dB
TG LEVEL
REF -20.0 dBm
10dB/
RBW
100 kHz
VBW
10 kHz
SWP
200 ms
SPAN 100.0 MHz
-40 dBm
CENTER
K, M
460.0MHz
K2, M2
480.0MHz