TK-3170/3173
6
8-3. Zone/Channel Select Mode
■
To enable Zone/Channel select mode
1. Press the [Side2] key when “SELF” is displayed. The
transceiver enters Channel Select Mode. On the left half
of the display, the zone number is displayed. On the right
half of the display, the channel number is displayed.
2. Each press of the [A] key changes the position of the “
▼
“
indicator between the zone select (left side) and the chan-
nel select (right side).
3. Rotate the selector to set the zone or channel number,
depending on the location or the ”
▼
“ indicator.
■
Channel edit mode
1. Press the [A] key so that the “
▼
“ indicator is located on
the right side, above the channel number.
2. Rotate the selector select your desired channel number.
3. Press the [C] key to enter Channel Edit Mode.
4. Press the [C] key again to select the setting you wish to
modify.
5. Rotate the selector to select the desired value.
6. Press the [B] key to store the value in memory and ad-
vance to the next setting.
7. Press the [C] key to skip any settings you do not wish to
modify.
8. Press the [S] key to exit. “SELF” appears on the display.
No.
Function
Choices
Display
Remarks
Zone/Channel Setting Mode
Select Channel
1~128
▼
[A] : Zone Selection/Channel Selection change
▼
Select Zone
1~128
▼
▼
Channel Edit
1
RX Frequency
Step 5.0kHz
Display when an item is selected or when a step
Step 6.25kHz
is changed (about 0.5 seconds)
Step 1MHz
[A] : Step change, Default=6.25kHz
Blank
[Side1] : Freq On/Blank switching
327.0000~550.0000MHz
The rightmost dot indicates
50Hz digit (On=5; Off=0)
2
RX Signaling
OFF
[Side1] : Off/QT/DQT switching
QT 67.0~250.3Hz
[A] : Mode switching
(EIA Mode)
[Side2] : Normal/Inverse switching
QT 67.0~254.1Hz
Default=OFF
(0.1Hz Step Mode)
DQT 023~754 Normal
(Standard Table Mode)
DQT 000~777 Normal
(1 Step Mode)
1 -
1
1 - 1 2 8
1 -
1
1 2 8 -
1
S T P _ _ 5 0 0
S T P _ _ 6 2 5
S T P _ _ _ 1 M
R.– – – – – – –
R.4 5 0. 0 0 0 0
– – – – – – – –
REALIGNMENT
Q T _ _ 6 7.0
∗
Q T _ 2 5 4.1
∗
D Q T 0 0 0 N
∗
D Q T 7 7 7 N
∗
Q T _ _ 6 7.0 _
Q T _ 2 5 0.3 _
D Q T 0 2 3 N _
D Q T 7 5 4 N _