15
TK-782
"
Sub LCD display
You can use 3-digit the display to display the channel num-
ber or group number. It is useful when the main (12-digit)
display indicates group or channel name or other functions.
"
Selective call alert LED
You can select whether or not the LED on the transceiver
flashes in an orange color when selective call was occurred.
"
PTT ID
PTT ID provides a DTMF or FFSK (DMS : Fleet-ID) ANI to
be sent with every time PTT (beginning of transmission, end
of transmission, or both).
You can program PTT ID “on” or “off” for each channel.
The contents of ID are programmed for each transceiver.
The timing that the transceiver sends ID is programmable.
BOT : DTMF ID (BOT)/FFSK ID is sent on beginning of
transmission.
EOT : DTMF ID (EOT)/FFSK ID is sent on end of transmis-
sion.
Both : DTMF ID (BOT)/FFSK ID is sent on beginning of
transmission and DTMF ID (EOT)/FFSK ID is sent on end
of transmission.
"
Radio password
When the password is set in the transceiver, user can not
use the transceiver unless enter the correct password.
This code can be up to 6 digits from 0 to 9 and input with
the key, and [CALL] key.
"
Off hook decode
If the Off hook decode function has been enabled, remov-
ing and replacing the microphone on the hook has no effect
for decoding QT/DQT and option signalling.
"
Timed power off
This function works as “Automatic Power Switch Off”.
Timed power off timer starts from the ignition-off. After
the timer expires, the radio will automatically turn off. The
timer will be reset if the ignition is turned on and off.
This function requires ignition-sense. Connect the igni-
tion-line to the 9-pin connector which is located at the rear of
the radio.
After the timer expires, press the power switch to turn on
the radio.
"
“TOT” pre-alert
The transceiver has “TOT” pre-alert timer. This parameter
selects the time at which the transceiver generates “TOT”
pre-alert tone before “TOT” is expired.
“TOT” will be expired when the selected time passes from
a TOT pre-alert tone.
"
“TOT” re-key time
The transceiver has “TOT” re-key timer. This timer is the
time you can not transmit after “TOT” exceeded. After “TOT”
re-key time expired you can transmit again.
OPERATING FEATURES /
"
"
"
"
"
"
"
"
Summary of Contents for TK-782
