46
TK-785
ADJUSTMENT
Adjustment Location
■
Switch
■
Adjustment Point (K,E)
■
Note
• Flash memory
The firmware program (User mode, Test mode, Tuning
mode, etc.), the data programmed and security number
(MPT serial number) by the FPU (KPG-62D) for the flash
memory, is stored in memory. When parts are changed,
program the data again.
• EEPROM
The tuning data (Deviation, Squelch, etc.) for the
EEPROM, is stored in memory. When parts are changed,
readjust the transceiver.
■
Repair Jig (Chassis)
Use jig (Part No. : A10-4010-02) for repairing the TK-785.
The jig facilitates the voltage check when the voltage on the
component side TX-RX unit is checked during repairs.
Measurement
Test-
equipment
Unit
Terminal
Adjustment
Unit
Parts
Method
Specifications/Remarks
Condition
Item
1. PLL lock
1) Set test mode
DVM
TX-RX
TP1
PLL
TC101 1.5V (Receive)
±
0.1V
voltage
CH : CH3 - Sig1
Power meter (A/2)
PTT : OFF (Receive)
TC102 1.5V (Transmit)
PTT : ON (Transmit)
2) CH : CH2 - Sig1
Check
8.0V or less
PTT : OFF (Receive)
PTT : ON (Transmit)
Common Section
L203
L204
L202
L6
VR1
TX-RX UNIT (A/2)
PLL/VCO
TC101
TP1
TC102
L6
VR1
TX-RX UNIT (A/2)
PLL/VCO
TC101
TP1
TC102
L207
L203
Power
switch
TX/RX
indicator
Microphone
jack
A
B
C
D
CALL
Volume
up/down
System
up/down
■
Adjustment Point (M)