Kenwood TK-785 Instruction Manual Download | Manualshive

Page: 14 / 20

background image

11

Call Diversions

■

Diverting Your Own Calls

1 Enter control code “

41” with the microphone keypad.

2 Press the microphone

key, then enter the unit number where you want

to divert the calls.

3 Press the microphone # key or the CALL key.

•

“Calling” appears on the display. While your request is being processed,
“Holding” appears on the display. When the call divert is set, “Complete”
momentarily appears on the display before returning to the previously selected
call address. The indicator appears on the display and flashes.

4 To end the call diversion, enter control code “#41” with the microphone

keypad, then press the microphone # key or the CALL key.

•

“Calling” appears on the display. While your request is being processed,
“Holding” appears on the display. When the call divert is cleared, “Complete”
momentarily appears on the display before returning to the previously selected
call address.

■

Diverting Third Party Calls

1 Enter control code “

44” with the microphone keypad.

2 Press the microphone

key, then enter the unit number of the transceiver

which you want to divert the calls.

3 Press the microphone # key or the CALL key.

•

“Calling” appears on the display. While your request is being processed,
“Holding” appears on the display. When the call divert is set, “Complete”
momentarily appears on the display before returning to the previously selected
call address.

4 To end the call diversion, enter control code “#44” with the microphone

keypad, press the microphone

key, enter the unit number of the

transceiver whose calls are being diverted, then press the microphone #
key or the CALL key.

•

“Calling” appears on the display. While your request is being processed,
“Holding” appears on the display. When the call divert is cleared, “Complete”
momentarily appears on the display before returning to the previously selected
call address.

«
...
12
13
14
15
16
...
»

Summary of Contents for TK-785





















Reviews:

No comments

Related manuals for TK-785

Brand: Harman Pages: 30

Freeview ZMX-7500

Brand: Zinwell Pages: 13

AVO-A4-WP110-EU

Brand: Intelix Pages: 4

Brand: Magellan Pages: 42

Brand: Trust Pages: 9

Brand: Coilcraft Pages: 16

Brand: R&S Pages: 112

Brand: GE Pages: 24

Brand: M-system Pages: 3

EasyListener2 230R

Brand: Phonic Ear Pages: 53

Gewa Control Easy HM

Brand: Abilia Pages: 12

Brand: VPC Pages: 2

Brand: Jonsa Pages: 12

Brand: HBM Pages: 130

Cloud Tv Box STB266

Brand: Sungale Pages: 16

Brand: Mpow Pages: 22

Brand: Yaesu Pages: 33

ADS-B FDL-978 Series

Brand: FreeFlight Pages: 26

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands