23
TK-860G/862G
INSTALLATION
1
2
3
4
5
6
2. Fold the flat cable (
) in the opposite direction (
).
3. Rotate the control section (
) 180 degrees (
).
4. Insert the flat cable into the control section connector,
CN501 (
).
5. Mount the control section on the transceiver (
).
CN501
1
2
3
4
5
6
Fig. 7
6. External Speaker
6-1. KES-3 : Option
The KES-3 is an external speaker for the 3.5-mm-diam-
eter speaker jack.
• Connection procedure
1. Connect the KES-3 to the 3.5-mm-diameter speaker jack
on the rear of the transceiver.
KES-3
Fig. 9
6. Rotate the control panel 180 degrees and mount it on the
transceiver. Refit the two halves of the case to complete
installation. (Fig. 8)
Fig. 8
6-2. KES-4 : Option
The KES-4 is an external speaker used with the acces-
sory connection cable.
• Connection procedure
1. Install the KCT-19 in the transceiver. (See the KCT-19
section.)
2. Insert the crimp terminal into the square plug supplied
with the KCT-19.
3. Connect CN8 of the transceiver to connector C of the
KCT-19 instead of to the internal speaker connector.
KES-4
1
3
6
13
15
12
Crimp terminal
(E23-0613-05)
Black lead
Black/White lead
Fig. 10
