6
TK-860G/862G
1-5. Rear panel
Antenna
connector
External
speaker jack
Power input
connector
1-6. Programmable Auxiliary Functions
The following keys can be programmed with the func-
tions listed below.
TK-860G :
/
(left side),
/
(right side), MON, A, D/A,
, , and SCN.
TK-862G :
/
(left side),
/
(right side), MON, , , and
A.
• AUX
• Channel Down
• Channel Up
• Display Character (TK-860G only)
• Emergency *
1
• Group Down (TK-860G only)
• Group Up (TK-860G only)
• Home Channel
• Horn Alert
• Key Lock
• Monitor A (Monitor Unmute-Momentary)
• Monitor B (Monitor Unmute-Toggle)
• Monitor C (Carrier Squelch-Momentary)
• Monitor D (Carrier Squelch-Toggle)
• None (No function)
• Operator Selectable Tone *
2
(TK-860G only)
• Public Address
• Redial
• Scan (TK-860G only)
• Scan Del/Add (TK-860G only)
• Selectable QT *
3
(TK-860G only)
• Talk-Around
• Volume Up
• Volume Down
• 2-Tone Encode Select *
4
*1 : This function can be used only with a foot switch.
*2 : This function is available for K market models only.
*3 : This function is available for M market models only.
*4 : The code for the TK-862G transceiver is not selectable.
You can transmit only one 2-Tone code, which is pre-
programmed in the transceiver.
2. Operation Features
The TK-860G/862G is a UHF FM radio designed to oper-
ate in conventional format. The programmable features are
summarized.
3. Transceiver Controls and Indicators
3-1. Front Panel Controls
All the keys on the front panel are momentary-type push
buttons. The functions of these keys are explained below.
• POWER key
Transceiver POWER key. When the power is switched
off, all the parameters are stored in memory. When the
power is switched on again, the transceiver returns to the
previous conditions.
• CHANNEL UP/DOWN key (Programmable)
•
/ key (Programmable) : TK-860G only
• SCAN key (Programmable) : TK-860G only
• MONITOR key (Programmable)
• A, D/A key (Programmable) : TK-860G only
•
,
, A key (Programmable) : TK-862G only
• VOLUME UP/DOWN key (Programmable)
• BUSY/TX LED
The BUSY indicator (Green LED) shows that the channel
is in use. The TX indicator (Red LED) shows that you are
transmitting.
3-2. Programmable Keys
The FPU (KPG-56D) enables programmable keys to se-
lect the following functions.
AUX, Channel down, Channel up, Display character *
1
,
Emergency (Only foot key ; M type only), Group down *
1
,
Group up *
1
, Home channel, Horn alert, Key lock, Monitor A,
Monitor B, Monitor C, Monitor D, Operator selectable tone
(K type only), Public address, Redial, Scan *
1
, Scan del/add
*
1
, Talk around, Volume down, Volume up and None.
These functions the FPU programs to the functionkeys
and described in the following sections.
*1 : TK-860G only.
• AUX
If this key is pressed, "AUX" icon lights on the display and
AUX port which is inside of the transceiver turns to the high
level. If pressed again, the "AUX" icon goes off and the AUX
ports turns to the lower level.
• Channel up/down
When the key is pressed each time, the channel number
to be selected is incremented/decremented and repeats if
held for one second or longer.
OPERATING FEATURES
