background image

XD-981MD (En)

66

Preparation section

Basic section

Application section

Knowledge sections

MD Edit Functions

Erasing a single track 

(TRACK ERASE) 

or erasing all tracks on a disc 

(ALL ERASE)

TRACK ERASE
During playback, it is possible to erase only the track be-
ing played. The track numbers of the tracks after the erased
track will be adjusted.
Be careful in using this operation because a track cannot
be recovered once it has been erased.

Make the preparations.

2

Select the ERASE mode.

1

3

Execute the erase operation.

÷

The track is erased (together with the track title).

ALL ERASE
During stop, all tracks can be erased. Be careful in using
this operation because the tracks cannot be recovered once
the entire minidisc has been erased.

÷

All tracks on a disc are erased (together with the disc title).

0

3

0

2

0

1

TRACK EDIT

3

MD

To erase one track (TRACK ERASE)

00 5

C O M P L E T E

E

!

C O M P L E T E

E

!

B L

A

N

R

D I S C

K

÷

Editing is aborted if no operation has been performed for 8
seconds.

Select “ERASE”.

Each press switches the operation.

1

DIVIDE ?

2

COMBINE ?

3

ERASE ?

4

Editing cancelled

0

3

0

2

0

1

EDIT

TOTAL

DIGITAL

TITLE SEARCH

TUNED

STEREO

C

8

0

:

12

.

00 2

0 0

2

+

R A S E ?

E

2

Set it.

1

Select “ALL ERASE”.

Each press switches the operation.

1

MOVE ?

2

COMBINE ?

3

ALL ERASE ?

4

Editing cancelled

EDIT

TITLE SEARCH

00 2

A L

L

+

R A S E ?

E

1

Start playback.

2

Select the track to be erased.

4

¢

P.CALL

To erase all tracks (ALL ERASE)

 Enter stop status.

7

Advance

Return

ENTER

0

3

0

2

0

1

TRACK EDIT

SET

0

3

0

2

0

1

0

3

0

2

0

1

ENTER

Summary of Contents for XD-981MD





















































































Reviews: